VEVOR
VEVOR 10 ft 14-30P to 14-30R Dryer Extension Cord 30A 125V/250V 10AWG
A 10 ft NEMA 14-30 extension cord rated 30 A at 125/250 V with 10 AWG copper wire for dryers or EV charging
- TypeOther Appliances
- Width10.83
- 30 A pure copper cable delivers stable high-power transmission
- 10 ft 10 AWG STW cord extends dryer or EV charger reach
- Weather-resistant STW jacket withstands -20 °C to 60 °C operation
- NEMA 14-30P to 14-30R connectors fit standard 30 A dryer outlets
- Includes non-woven bag and PVC tie for tidy storage
10 ft NEMA 14-30 Extension Cord
This 10 ft cord extends a 30 A 125 V/250 V dryer or EV charger outlet using 10 AWG pure copper conductors. It connects a NEMA 14-30P plug to a NEMA 14-30R receptacle and delivers up to 7500 W. The STW jacket suits indoor and outdoor use.
STW Jacket Handles -20 °C to 60 °C
The thermoplastic sheath resists rain, humidity and direct sunlight while remaining flexible in cold conditions. Copper conductors minimise resistive heating at the full 30 A rating. No active cooling is required during normal operation.
Fits Standard Dryer and EV Inlets
The male 14-30P end plugs into an existing dryer receptacle or EVSE outlet; the female 14-30R end accepts the appliance or charger cord. A non-woven bag and PVC tie are included for storage. Builders needing a different amperage or pin configuration must select an alternative cord.
Highlights
- 30 A pure copper cable delivers stable high-power transmission
- 10 ft 10 AWG STW cord extends dryer or EV charger reach
- Weather-resistant STW jacket withstands -20 °C to 60 °C operation
- NEMA 14-30P to 14-30R connectors fit standard 30 A dryer outlets
- Includes non-woven bag and PVC tie for tidy storage
Specifications
| Type | Other Appliances |
|---|---|
| Width | 10.83 |
Questions about this item
How do I install the 10 ft NEMA 14-30P to 14-30R extension cord and what step is often missed?
Plug the male 14-30P end into the 125/250V receptacle and the female 14-30R end into the dryer or EV charger; the step often missed is confirming the circuit breaker is rated for 30A before applying load.
What maintenance or replacement will the STW 10AWG/4C cable need over time?
Inspect the black non-woven bag and PVC cable tie for wear, check the plug blades and socket contacts for discoloration or heat damage, and replace the cord if the jacket shows cracking after prolonged outdoor exposure.
What limit appears first when the cord runs at 30A continuously?
The 7500 Watt rating at 30A is the limiting factor; sustained operation at this level will cause conductor heating within the -20 to 60°C operating range, so monitor plug temperature during extended EV charging sessions.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
