We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two pairs of flat-face hydraulic couplers in chrome-plated steel with red rubber dust caps

VEVOR

VEVOR 1/2" Flat Face Hydraulic Couplers ISO 16028 2 Pairs 5076 PSI 25 GPM 4 Dust Caps

SKU CH-5Y0Y-FVNEH

Two pairs of 1/2" flat-face hydraulic couplers with 1/2" NPT threads, ISO 16028 compliant, rated 5076 PSI and 25 GPM maximum flow, plus four dust caps

  • TypeOther Appliances
  • Width3.86
  • ISO 16028 compliant flat-face design ensures secure hydraulic connections
  • Sleeve locking mechanism allows quick push-to-connect operation with simple handling
  • Hardened 45# carbon steel construction withstands 5076 PSI rated pressure for lasting durability
  • Maximum flow capacity of 25 GPM supports high-demand hydraulic applications
  • Four rubber dust caps protect couplers from contamination during storage

1/2" Flat Face Hydraulic Couplers

Two pairs of ISO 16028 flat face couplers connect hydraulic lines on skid steer loaders and similar equipment. The 1/2 inch NPT threads on both male and female halves allow direct installation without adapters. Hardened carbon steel construction with chrome plating resists wear in demanding environments. Dust caps protect the sealing surfaces when disconnected.

Rated 12 GPM continuous with 25 GPM maximum

The couplers handle a continuous flow of 12 GPM and peak flows up to 25 GPM at 5076 psi. This capacity suits most skid steer hydraulic circuits and auxiliary attachments. Systems requiring sustained flow above 12 GPM will exceed the rated continuous limit. The flat face design minimises fluid loss and air inclusion during connection cycles.

Sleeve locking with 1/2" NPT threads

A push to connect sleeve locking mechanism enables one handed operation without tools. The 1/2 inch NPT internal threads on both coupler halves match standard hydraulic hose ends. Four rubber dust caps seal the ports against contamination during storage. Buyers needing larger body sizes or different thread standards cannot use this kit.

Highlights

  • ISO 16028 compliant flat-face design ensures secure hydraulic connections
  • Sleeve locking mechanism allows quick push-to-connect operation with simple handling
  • Hardened 45# carbon steel construction withstands 5076 PSI rated pressure for lasting durability
  • Maximum flow capacity of 25 GPM supports high-demand hydraulic applications
  • Four rubber dust caps protect couplers from contamination during storage

Specifications

TypeOther Appliances
Width3.86

Questions about this item

Will these 1/2" NPT flat-face couplers thread directly onto the existing hoses on my older skid steer?

Both male and female halves use 1/2" NPT internal threads, so they will mate with any hose or adapter that has a matching 1/2" NPT external thread.

How can I confirm the sleeve-lock mechanism is engaging properly after I push the couplers together?

Push until the sleeve clicks forward and the locking groove is fully covered; the flat faces should be flush with no gap visible.

The listing mentions four dust caps — are the two coupler pairs and all four caps the only items in the box?

Yes, the package contains two male couplers, two female couplers and four red rubber dust caps; no seals, thread tape or adapters are included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.