Vestil
Vestil FL-LK-6EH floor lock 7 in retracted 10 5/8 in extended 6 in wheel 5 x 7-1/4 in plate steel
Secures mobile equipment by locking casters at a 7 in retracted and 10 5/8 in extended height
- TypeTraffic & Parking Lot
- Secures equipment firmly with a 10 5/8 in extended height
- Retracts to 7 in for low-profile storage when not engaged
- Fits 6 in wheels for broad caster compatibility
- Mounts on a 5 in x 7-1/4 in steel plate for stable attachment
- Bolt-hole spacing of 3-1/8 in x 5-3/8 in and 4 in x 6-1/4 in suits standard patterns
Floor lock for 8 in caster mounting height
The Vestil FL-LK-6EH is a general purpose floor lock designed to secure equipment fitted with casters at an 8 in mounting height. It bolts to a steel mounting plate measuring 5 in by 7-1/4 in with inside bolt hole spacing of 3-1/8 in by 5-3/8 in and outside spacing of 4 in by 6-1/4 in. The unit suits workshops, warehouses and mobile workstations that need positive positioning on level floors.
Retracted height 7 in and extended height 10 5/8 in
When retracted the lock stands 7 in high and extends to 10 5/8 in to engage the floor, a travel of roughly 3 5/8 in. The steel construction provides a rigid foot that resists bending under load. Operation is manual and produces no noise or power draw, making it suitable for quiet environments and locations without electrical supply.
Fits 6 in wheels with A pattern plate
The lock is sized for 6 in diameter wheels and uses the A mounting plate bolt hole pattern. It frees the caster to swivel and roll when retracted and locks the unit firmly when extended. No additional hardware or wiring is required beyond the bolts that match the specified hole spacing. Buyers needing a different mounting pattern or wheel diameter should select another model.
Highlights
- Secures equipment firmly with a 10 5/8 in extended height
- Retracts to 7 in for low-profile storage when not engaged
- Fits 6 in wheels for broad caster compatibility
- Mounts on a 5 in x 7-1/4 in steel plate for stable attachment
- Bolt-hole spacing of 3-1/8 in x 5-3/8 in and 4 in x 6-1/4 in suits standard patterns
Specifications
| Brand | VESTIL |
|---|---|
| Type | Traffic & Parking Lot |
Questions about this item
How do I bolt the 5 in x 7-1/4 in mounting plate so the 3-1/8 in x 5-3/8 in inside spacing lines up?
Align the plate holes with your caster frame using the 3-1/8 in by 5-3/8 in inside centres, then secure all four bolts before lowering the lock.
Which parts wear first on this steel floor lock under daily use?
The friction pad and the spring-loaded plunger see the most wear; inspect them monthly and replace when the pad thins or the spring loses tension.
At what point does the 10 5/8 in extended height stop the lock from engaging?
The lock only reaches the floor when the caster mounting height is 8 in; any higher and the 10 5/8 in stroke cannot make contact.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
