Venus Optics
Venus Optics FEP14-532A Tubing 1/4" OD 5/32" ID 100
FEP tubing with 1/4" outer and 5/32" inner diameter supplied in a 100-foot length
- FEP material resists chemicals and high temperatures
- 1/4 inch outer diameter fits standard fittings
- 5/32 inch inner diameter ensures precise flow control
- 100 foot length provides ample supply for projects
- Venus brand delivers reliable pneumatic tubing performance
Tubing for pneumatic systems
This Venus Optics FEP tubing is made for compressed-air and vacuum lines in workshops and light industrial settings. The fluorinated ethylene propylene material resists chemicals and moisture, so it suits environments where rubber or polyurethane would degrade. It arrives new in a 100-foot coil ready for cutting to length.
1/4 inch OD by 5/32 inch ID
The critical spec is the 1/4 inch outer diameter paired with a 5/32 inch inner diameter, which determines push-to-connect fitting compatibility and flow capacity. Match these dimensions exactly to your existing fittings; a mismatch will cause leaks or connection failure. The FEP wall thickness is set by this pairing.
Sustained pressure and temperature stability
Under continuous pressurised use the tubing holds its shape without ballooning, and the FEP construction tolerates a wide temperature range without becoming brittle or soft. It does not plasticise over long runs, so flow remains consistent in extended duty cycles. The smooth bore resists particulate build-up in vacuum service.
Highlights
- FEP material resists chemicals and high temperatures
- 1/4 inch outer diameter fits standard fittings
- 5/32 inch inner diameter ensures precise flow control
- 100 foot length provides ample supply for projects
- Venus brand delivers reliable pneumatic tubing performance
Specifications
| Brand | VENUS |
|---|
Questions about this item
What does the 100 foot length mean when I run it in my shop?
The 100 foot roll lets you cut custom lengths for multiple pneumatic lines without joining shorter pieces
How does the FEP material affect what fluids or air I can push through it?
FEP resists most chemicals and handles higher temperatures than standard polyurethane tubing
What fittings do I need for the 1/4 inch OD and 5/32 inch ID dimensions?
Use push-to-connect or compression fittings sized for 1/4 inch outside diameter tubing
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
