We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow heat-shrink ring terminal, 5/16 in stud, 10 AWG, 600 V, pack of 10

Velvac

Velvac 37416 Ring Terminal 5/16 in Stud 10 AWG 600 V Heat Shrink

SKU CH-G6X0-7DM52

Heat-shrink ring terminal for 10–12 AWG wire, 5/16 in stud, 600 V, CSA and UL listed, pack of 10

  • TypeElectrical Connectors
  • CSA and UL listed for code-compliant installations
  • Heat-shrink insulation seals out moisture and corrosion
  • Brazed barrel prevents splitting under high current
  • Crimp termination accepts 12 to 10 AWG wire
  • Rated 600 V and 221 °F for demanding circuits

Velvac 37416 10 AWG Ring Terminal

The Velvac 37416 is a heat-shrink ring terminal designed for 10 AWG wire and a 5/16 inch stud. It provides a sealed, crimped connection rated for 600 volts in automotive and industrial wiring jobs.

Suits installers needing a sealed 10 AWG lug

It fits technicians who require a fully insulated, CSA certified and UL listed terminal for 10 AWG conductors. Buyers needing a larger wire gauge or a different stud diameter should look at other options.

Handles 10 AWG at 600 V

The barrel accepts 10 AWG down to 12 AWG and the heat-shrink insulation withstands up to 221 degrees F. The single 0.53 inch tongue and 1.45 inch overall length limit use to one 5/16 inch stud per terminal.

Highlights

  • CSA and UL listed for code-compliant installations
  • Heat-shrink insulation seals out moisture and corrosion
  • Brazed barrel prevents splitting under high current
  • Crimp termination accepts 12 to 10 AWG wire
  • Rated 600 V and 221 °F for demanding circuits

Specifications

BrandVELVAC
TypeElectrical Connectors

Questions about this item

What wire gauge do I need to have on hand for the 10 AWG terminal?

The terminal accepts wire from 12 AWG up to 10 AWG, so prepare a conductor in that range before crimping.

Will the 5/16 in stud size fit the existing bolts on my older battery posts?

The ring tongue is built for a 5/16 in stud; match that bolt diameter on your current hardware for a secure fit.

How can I confirm the heat-shrink seal has activated properly after crimping?

Apply heat until the yellow tubing shrinks tightly around the wire and adhesive flows, showing a uniform, sealed barrel.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.