Velvac 37415 Ring Terminal 1/4 in Stud 10 AWG 600 V Heat Shrink

Velvac 37415 Ring Terminal 10 AWG

The Velvac 37415 is a heat-shrink ring terminal built for 10 AWG conductors in automotive and industrial wiring jobs. It accepts wire sizes from 12 AWG up to 10 AWG and carries a 600 V rating with full-coverage yellow insulation. A brazed barrel and nickel-alloy contact deliver a solid crimp connection that meets CSA and UL standards.

Upgrade from bare or vinyl-insulated terminals

This terminal replaces open-barrel or vinyl-covered rings when moisture, vibration or abrasion threaten the joint. The heat-shrink sleeve seals the crimp area completely once heated, adding strain relief and environmental protection in a single step. The jump is worth it whenever a sealed, inspectable connection is required by code or by the service environment.

10 AWG capacity with 0.53 in tongue

The 0.53 in tongue fits a 1/4 in stud cleanly, and the 1.5 in overall length leaves room for the shrink tube to recover without crowding adjacent terminals. It handles continuous loads at the rated 600 V and 221 °F maximum temperature without degradation. The 10-pack quantity suits a single vehicle harness or a small panel job, but larger looms will need additional packs.