We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten blue nylon-insulated female bullet disconnect terminals in a clear bag

Velvac

Velvac 30379 Female Bullet Disconnect Blue 16-14AWG PK10

SKU CH-T1RX-KCN76

Pack of 10 blue female bullet disconnects for 16-14 AWG wire, crimp termination with nylon heat-shrink insulation, rated 600 V and 221 °F, UL listed and RoHS compliant

  • TypeElectrical Connectors
  • Blue insulation identifies 16–14 AWG wire range
  • Nylon with heat-shrink sleeve seals out moisture
  • Tin-plated copper socket crimps on 0.156 in bullet tabs
  • UL listed and RoHS compliant for 600 V service
  • Pack of 10 connectors for multiple terminations

Velvac 30379 Female Bullet Disconnects

The Velvac 30379 pack supplies ten female bullet disconnect terminals in blue nylon with heat-shrink insulation. They accept 16 to 14 AWG copper wire and are UL listed and RoHS compliant for general automotive and industrial wiring tasks.

Crimp installation with heat-shrink seal

Strip the wire to fit the 0.097 inch barrel inside diameter, crimp using a standard crimp tool, then apply heat to activate the shrink tubing for a moisture-resistant seal. The brazed seam resists splitting, but an undersized crimp or insufficient heat can leave the connection exposed.

Verify wire gauge and voltage before ordering

Confirm the circuit operates at or below 600 volts and uses 16 or 14 AWG conductors. The tab width is 0.156 inch and thickness 0.032 inch, so the mating male bullet must match those dimensions for a secure fit.

Highlights

  • Blue insulation identifies 16–14 AWG wire range
  • Nylon with heat-shrink sleeve seals out moisture
  • Tin-plated copper socket crimps on 0.156 in bullet tabs
  • UL listed and RoHS compliant for 600 V service
  • Pack of 10 connectors for multiple terminations

Specifications

TypeElectrical Connectors
BrandVELVAC

Questions about this item

How can I confirm the Velvac 30379 bullet disconnect is seated correctly after crimping?

After crimping, the barrel inside diameter of .097 in should grip the 16-14 AWG wire firmly, the blue nylon insulation with heat shrink should fully cover the joint, and the tin-finished copper socket should slide onto a .156 in wide, .032 in thick tab with a solid click.

What comes in the Velvac 30379 pack and what else is needed to install them?

The pack contains ten female bullet disconnects with blue nylon heat-shrink insulation, tin-plated copper contacts and brazed seams; you must supply 16-14 AWG wire and a suitable crimp tool.

Which version of the Velvac 30379 should I choose for a 14 AWG circuit rated at 600 V and 221 °F?

The single listed version handles 16-14 AWG, 600 V maximum and 221 °F maximum temperature, so it covers that circuit without any alternative capacity to select.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.