Velvac
Velvac 100132 air cylinder 3 1/2 in bore 8 11/16 in stroke double acting
Double-acting air cylinder with 3 1/2 inch bore, 8 11/16 inch stroke and 120 psi maximum pressure
- Double-acting design delivers force in both directions
- 3 1/2 inch bore provides substantial piston area
- 8 11/16 inch stroke enables extended linear travel
- Magnetic piston allows position sensing without contact
- 120 psi maximum pressure rating suits demanding applications
Velvac 100132 Air Cylinder Overview
This Velvac 100132 is a double-acting air cylinder built with an aluminum body and a magnetic piston. It mounts via a clevis and uses a 1/4 in female NPT inlet. The unit is non-repairable and rated for 120 psi at 185 Degrees F.
Suited for Single-Axis Linear Motion
It fits machines needing a 3 1/2 in bore and an 8 11/16 in stroke where a clevis mount is required. Buyers needing a repairable cylinder, a different mounting style, adjustable cushions, or a bore size other than 3 1/2 in should look at other models.
Critical Spec: 120 psi Maximum Pressure
The cylinder is rated for a maximum operating pressure of 120 psi. Systems running above this limit will damage the unit. Verify your supply pressure stays at or below this figure before installation.
Highlights
- Double-acting design delivers force in both directions
- 3 1/2 inch bore provides substantial piston area
- 8 11/16 inch stroke enables extended linear travel
- Magnetic piston allows position sensing without contact
- 120 psi maximum pressure rating suits demanding applications
Specifications
| Brand | VELVAC |
|---|
Questions about this item
What clevis mounting clearance does the 3 1/2 in bore cylinder need?
The cylinder uses a clevis mount; allow space for the 8 11/16 in stroke travel plus the clevis pin and bracket thickness on each end.
How do I plumb the 1/4 in NPT female ports on this double-acting cylinder?
Apply thread sealant to 1/4 in NPT male fittings, connect supply lines to both ports, then pressurise slowly to bleed air before full operation.
When should I replace this non-repairable aluminum cylinder?
Replace the unit if the magnetic piston fails to trigger sensors, if rod seal leaks appear, or if the bore shows scoring after 120 psi service.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
