Velvac
Velvac 032058 Drain Pull Valve 1/4 NPT 120 PSI
Drains compressed air systems via a 4 ft cable-operated valve rated to 120 PSI
- Quick tank drainage with 1/4" NPT female inlet and outlet
- Reliable operation up to 120 psi maximum working pressure
- Convenient 4-foot pull cable for remote valve actuation
- Direct-fit replacement for air compressor and vacuum pump tanks
- Ready to install with standard NPT threading on both ports
What this valve does
This Velvac drain pull valve provides a manual drain point for compressed-air systems. It is fitted with 1/4 inch NPT female threads on both inlet and outlet and rated for 120 psi maximum operating pressure.
Installation notes
The valve threads directly into a matching 1/4 inch NPT port using standard pipe sealant or tape. A four-foot pull cable allows remote actuation from a convenient location. Mis-threading the NPT connection or exceeding the 120 psi rating are the most common causes of leaks or valve failure.
Pressure rating decides fit
The 120 psi maximum operating pressure is the single figure that determines whether this valve suits your system. If your compressor or air circuit runs above that pressure, this part is not suitable.
Highlights
- Quick tank drainage with 1/4" NPT female inlet and outlet
- Reliable operation up to 120 psi maximum working pressure
- Convenient 4-foot pull cable for remote valve actuation
- Direct-fit replacement for air compressor and vacuum pump tanks
- Ready to install with standard NPT threading on both ports
Specifications
| Brand | VELVAC |
|---|
Questions about this item
How do I confirm the Velvac 032058 drain pull valve is operating correctly after installation?
Pressurise the air system to its normal working pressure up to 120 PSI, then pull the 4 ft cable; the valve should open cleanly, release condensate, and snap shut without leakage when released.
What comes with the Velvac 032058 valve and what must I supply separately?
The valve body with 1/4 in female NPT inlet and outlet plus the 4 ft pull cable are included; you must provide compatible 1/4 in NPT fittings, thread sealant and mounting hardware for your air tank or compressor.
Which version of the Velvac drain pull valve should I choose for a 120 PSI system?
Select the 032058 model — it is rated for a maximum operating pressure of 120 PSI and has 1/4 in female NPT ports on both inlet and outlet.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
