Vega
Vega MSP29162 Impact Socket 3/8 Sq Dr 9/16 Spring Mag tool storage
A 3/8 inch drive impact socket with spring-loaded magnetic retention for 9/16 inch fasteners
- 3/8 inch square drive fits common ratchets
- 9/16 inch spring-loaded magnetic socket holds fasteners securely
- Long-length design reaches deep or recessed bolts
- Impact-rated construction withstands high-torque use
- Vega brand reliability for professional garage storage
Impact Socket for 3/8 Drive
The Vega MSP29162 is a long-length impact socket built for 3/8 inch square drives and a 9/16 inch fastener size. It features a spring-loaded magnetic insert that holds the bolt head securely during positioning. Professional technicians and serious home mechanics use it for deep-reach suspension and engine work where standard sockets fall short. The new condition ensures full factory hardness and finish.
Replaces Standard Short Sockets
This socket upgrades from a regular-depth impact socket when the fastener sits inside a recess or behind an obstruction that a short wall cannot clear. The jump is worth it on jobs such as lower control-arm bolts, transmission bell-housing fasteners or exhaust manifold studs where the extra reach saves removing surrounding components. It also replaces the habit of stacking extensions and universal joints that can wobble off under torque.
Check Drive Size and Clearance
Verify that your impact gun or breaker bar has a 3/8 inch square drive before ordering. Confirm the 9/16 inch hex matches the fastener you intend to turn; metric equivalents are not interchangeable. Ensure the long body can physically fit into the recess without hitting adjacent parts, and that the spring magnet does not interfere with any sensor or wiring harness in the work area.
Highlights
- 3/8 inch square drive fits common ratchets
- 9/16 inch spring-loaded magnetic socket holds fasteners securely
- Long-length design reaches deep or recessed bolts
- Impact-rated construction withstands high-torque use
- Vega brand reliability for professional garage storage
Specifications
| Brand | VEGA |
|---|
Questions about this item
What size square drive does the Vega MSP29162 impact socket require for mounting?
The socket uses a 3/8 square drive, which fits standard 3/8 drive ratchets and extensions.
How do you install the socket onto the ratchet, and what step is often missed?
Align the 3/8 square drive with the ratchet anvil and press firmly until the detent ball engages; the step often missed is verifying the ball clicks into the socket groove.
When should the spring-loaded magnet inside the socket be checked or replaced?
Inspect the spring magnet if fasteners stop holding securely during use; replace it when the magnetic pull noticeably weakens or the spring fails to retract.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
