Vega
Vega 31903 Impact Socket 1/2 Sq Dr 19mm
A long-reach 19 mm impact socket with a 1/2 inch square drive for deep fasteners
- 1/2-inch square drive fits standard impact wrenches
- 19 mm opening matches common fastener sizes
- Long-length design reaches recessed bolts easily
- VEGA brand denotes professional-grade tool quality
- Free shipping on orders over $75
1/2" Drive 19 mm Impact Socket
The Vega 31903 is a professional-grade impact socket built for 1/2" square-drive tools. Its 19 mm opening fits standard fasteners found in automotive and heavy-equipment work. The long-length design reaches recessed bolts without needing an extension.
Long-Reach Build For Tight Spaces
Extended length lets the socket seat fully on deep-set nuts while the 1/2" drive engages securely with impact guns or breaker bars. The through-hole and groove accept a retaining pin and ring so the socket stays locked on the anvil during high-torque cycles.
Check Drive Size And Fastener Fit
Verify that your impact wrench or ratchet uses a 1/2" square drive before ordering. Confirm the fastener you are turning measures 19 mm across the flats; this socket will not suit smaller or larger bolt heads.
Highlights
- 1/2-inch square drive fits standard impact wrenches
- 19 mm opening matches common fastener sizes
- Long-length design reaches recessed bolts easily
- VEGA brand denotes professional-grade tool quality
- Free shipping on orders over $75
Specifications
| Brand | VEGA |
|---|
Questions about this item
Does the 1/2 inch square drive on the Vega 31903 socket match standard impact wrench anvils?
Yes, the 1/2 inch square drive is the industry-standard interface for impact tools and fits common 1/2 inch drive anvils without adapters.
What clearance does the 19mm long-length body need to reach recessed fasteners?
The long-length design provides extended reach for deep or recessed 19mm bolt heads where standard sockets cannot engage fully.
How do I secure the Vega 31903 socket onto the 1/2 inch drive, and what step is often missed?
Align the socket drive hole with the anvil, press firmly until the detent ball clicks into the socket groove, and verify the ball is fully seated before applying torque.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
