Vandue Corporation
Vandue Corporation California Sun Shade Sail Hardware Padeye 80mm x 50mm x 35mm
Stainless-steel padeye measuring 80 by 50 by 35 mm secures shade-sail corners with four mounting holes
- Typeshade-sails
- Weight0.2000
- Secure four-point mounting with 80 mm x 50 mm pad eye
- Corrosion-resistant 316 stainless steel for outdoor durability
- Single padeye simplifies shade sail installation
- Lightweight .2000 kg design eases handling and positioning
- Galvanized hardware withstands sun, rain and wind exposure
Stainless-Steel Padeye for Shade Sails
This 316 stainless-steel padeye provides a fixed anchor point for residential or commercial shade sails. Its corrosion-resistant construction suits permanent outdoor exposure in coastal or high-humidity environments. The four-hole base distributes load across timber, masonry or metal substrates. Buyers needing adjustable tension or quick-release hardware will require separate turnbuckles or snap hooks.
80 mm x 50 mm x 35 mm Four-Hole Mounting Footprint
The rectangular base measures 80 mm by 50 mm with a 35 mm projection, giving a broad bearing surface for lag bolts or through-bolts. At 0.2 kg the piece adds negligible dead load to pergola beams or fascia boards. It handles typical residential sail tensions but is not rated for engineered tensile structures or permanent architectural canopies.
Single Component in a Modular Hardware System
The padeye functions as one node in a complete rigging kit that may include turnbuckles, S-hooks and snap hooks sold separately. Installers must supply their own fasteners matched to the mounting substrate. The open eye accepts standard carabiners or shackles, freeing the builder to choose connection hardware that suits local wind-load requirements.
Highlights
- Secure four-point mounting with 80 mm x 50 mm pad eye
- Corrosion-resistant 316 stainless steel for outdoor durability
- Single padeye simplifies shade sail installation
- Lightweight .2000 kg design eases handling and positioning
- Galvanized hardware withstands sun, rain and wind exposure
Specifications
| Brand | California Sun |
|---|---|
| Part Number | SSHARDWARE-PADEYE |
| Type | shade-sails |
| Weight | 0.2000 |
Questions about this item
Will the 80mm x 50mm pad eye align with the bolt pattern on my existing timber posts?
The pad eye measures 80mm long by 50mm wide with four mounting holes, so you can check the hole centres against your current brackets before drilling.
How can I verify the 316 stainless steel is holding the load after installation?
Inspect the pad eye for any deformation or corrosion at the 35mm projection point; 316 stainless should show no rust or bending under normal shade-sail tension.
Does the single pad eye come with mounting bolts or do I need to supply my own?
Only the pad eye is included; you must provide four suitable bolts, washers and nuts for the 80mm x 50mm base plate.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
