We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Amber Valvoline VR1 motor oil in a one-quart bottle

VALVOLINE

VALVOLINE 822401 Motor Oil 1 qt SAE 30

SKU CH-9VNB-HVK8W

Conventional SAE 30 motor oil in a one-quart bottle for gasoline cars and light-duty trucks

  • Protects gasoline engines with SAE 30 viscosity grade
  • Conventional formulation meets API and SAE standards
  • Stable from -24 °F to 390 °F operating range
  • Low pour point of -7.6 °F aids cold starts
  • Viscosity index 113 maintains film strength across temperatures

VALVOLINE VR1 SAE 30 Motor Oil

This conventional engine oil carries an SAE 30 viscosity grade and meets API and SAE standards. It is formulated for gasoline engines in cars and light-duty trucks. The amber-coloured fluid comes in a one-quart bottle for straightforward top-ups or complete fills.

Verify engine requirements and operating range

Confirm that your vehicle manufacturer specifies SAE 30 viscosity for the expected climate. The oil flows down to a pour point of -7.6 degrees F and a minimum operating temperature of -24 degrees F. Its flash point and maximum operating temperature are both rated at 390 degrees F.

Viscosity stability under sustained heat

At 100 degrees C the kinematic viscosity measures 11 cSt, while at 40 degrees C it measures 95 cSt, yielding a viscosity index of 113. These figures indicate how the oil maintains film strength during extended high-temperature running rather than only during a cold start.

Highlights

  • Protects gasoline engines with SAE 30 viscosity grade
  • Conventional formulation meets API and SAE standards
  • Stable from -24 °F to 390 °F operating range
  • Low pour point of -7.6 °F aids cold starts
  • Viscosity index 113 maintains film strength across temperatures

Specifications

BrandVALVOLINE

Questions about this item

Does the 1 qt bottle include a pour spout or funnel, or must I buy one separately?

The oil comes in a standard 1 qt bottle; no pour spout or funnel is included, so you will need to supply your own if required.

When should I choose the SAE 30 grade instead of a multi-grade oil?

SAE 30 is a single-grade oil suited to warmer climates or older gasoline engines that specify a straight 30 weight; multi-grade oils cover wider temperature ranges.

What does the 11 cSt viscosity at 100 °C tell me about protection in a running engine?

At 11 cSt the oil meets the SAE 30 target, providing a stable film at typical operating temperatures up to 390 °F.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.