We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue-green 1-quart bottle of Valvoline 2-cycle synthetic blend marine motor oil

VALVOLINE

VALVOLINE 822384 2-Cycle Synthetic Blend Marine Motor Oil 1 Qt

SKU CH-T4A2-2CR48

Synthetic-blend 2-cycle marine oil meets TC-W3 and API TC standards, protects engines from -30 °F to 220 °F, and includes detergents to reduce deposits

  • Synthetic blend protects marine engines with API TC certification
  • 1-quart bottle covers motorcycles and snowmobiles too
  • Blue-green dye lets you verify fuel mix at a glance
  • Operates from -30 °F to 220 °F for year-round reliability
  • Low pour point of -32.8 °F ensures cold-start flow

Marine Two-Stroke Lubricant

VALVOLINE 822384 is a synthetic-blend two-cycle oil formulated for marine outboards and other water-cooled two-stroke engines. The one-quart bottle meets the TC-W3 standard and carries API TC certification for detergent performance. Blue-green dye makes the fuel mix visible during preparation.

Replaces Straight Mineral Oils

Switching from a non-synthetic two-stroke fluid is worthwhile when an engine sees extended wide-open-throttle runs or sits for weeks between trips. The synthetic blend resists deposit formation on pistons and rings better than conventional mineral oils. Engines that currently show carbon buildup or smoke at start-up benefit most from the change.

Sustained Load Behaviour

Detergent additives keep combustion chambers clean during long periods at constant rpm, reducing ring sticking that can cause power loss. The fluid maintains film strength up to the 220 degrees F maximum operating temperature and flows at -30 degrees F for cold starts. Flash point is 170 degrees F and pour point is -32.8 degrees F.

Highlights

  • Synthetic blend protects marine engines with API TC certification
  • 1-quart bottle covers motorcycles and snowmobiles too
  • Blue-green dye lets you verify fuel mix at a glance
  • Operates from -30 °F to 220 °F for year-round reliability
  • Low pour point of -32.8 °F ensures cold-start flow

Specifications

BrandVALVOLINE

Questions about this item

What size bottle fits the 1 qt container of Valvoline 822384 2-Cycle oil?

The oil comes in a 1 qt bottle that pours directly into the engine's oil reservoir or a premix container; no special funnel size is required.

How do I mix this TC-W3 synthetic blend at the correct ratio for my outboard?

Check the engine manual for the manufacturer's specified fuel-to-oil ratio, then measure the oil into the fuel tank before adding gasoline to ensure proper mixing.

When should I replace the oil in a 2-cycle engine that uses Valvoline 822384?

Two-cycle engines consume the oil with the fuel, so there is no separate oil change; simply refill the oil tank or premix batch each time you refuel.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.