Value Brand
Value Brand Whip Check Safety Cable 38 in Steel 1/4 in 125 psi
A 38-inch steel whip-check cable rated to 125 psi secures air hoses 1½ to 3 inches wide to tools, meeting Bureau of Mines, OSHA and U.S. Army Corps of Engineers standards
- Prevents dangerous hose whip with 125 psi rating
- Meets Bureau of Mines OSHA US Army Corps standards
- 38 inch steel cable fits 1.5 to 3 inch hose IDs
- 1/4 inch diameter steel construction resists wear and corrosion
- New condition ensures full safety compliance out of the box
Safety Cable for Air Hoses
This whip check safety cable is designed to restrain pressurised air hoses if a coupling fails. It is built from steel and measures 38 inches overall with a 1/4 inch cable diameter. The device suits workshops and mobile crews that run compressed air lines up to 125 psi.
Check Hose Size and Pressure Rating
Verify that your hose inside diameter falls between 1 1/2 inches and 3 inches before fitting this cable. Confirm the system operating pressure does not exceed 125 psi and that the end connections match the hose-to-tool configuration specified for this unit.
Suits Standard Workshop Air Lines
This cable fits typical shop hoses within the stated diameter and pressure range. It is not intended for hoses smaller than 1 1/2 inches or larger than 3 inches inside diameter. Buyers needing restraint for higher pressures or different hose sizes should select an alternative device.
Highlights
- Prevents dangerous hose whip with 125 psi rating
- Meets Bureau of Mines OSHA US Army Corps standards
- 38 inch steel cable fits 1.5 to 3 inch hose IDs
- 1/4 inch diameter steel construction resists wear and corrosion
- New condition ensures full safety compliance out of the box
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
What comes with the 38 in whip check cable and what must be purchased separately?
The cable is made of steel with a 1/4 in diameter and 38 in overall length, designed for hose-to-tool connections. Hoses and couplings are not included.
Which version should I choose for a 2 in hose running at 125 psi?
This whip check fits hose inside diameters from 1 1/2 in to 3 in and is rated for a maximum hose pressure of 125 psi, matching your requirement.
What does the 125 psi rating mean when the cable is installed on my air line?
It indicates the maximum hose pressure the safety cable is designed to restrain; if pressure exceeds 125 psi the cable may not prevent whip.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
