Value Brand
Value Brand WESTWARD 41R241 TIG Welding Rod 1/8" 36" ERCuSi-A 1 lb
TIG welding rod for copper alloys, 1/8 inch diameter, 36 inch length, 1 lb pack, ERCuSi-A classification, 50 ksi tensile strength
- TypeWelding Supplies
- TIG rod joins copper and copper alloys
- 125 in diameter suits precision TIG work
- 36 in length gives long continuous runs
- ERCuSi-A classification meets AWS standards
- 50 ksi tensile strength for strong joints
Copper-silicon alloy TIG rod
This Value Brand WESTWARD 41R241 rod is a copper-silicon alloy filler metal classified to AWS ERCuSi-A. It is intended for TIG welding copper, copper-silicon, and copper-zinc base metals in combinations such as copper to copper-silicon or copper-zinc to copper-zinc. The rod measures 36 inches long with a 0.125 inch diameter and weighs 1 lb. It provides an as-welded tensile strength of 50 ksi for these dissimilar copper-alloy joints.
Check base metal and process compatibility
Verify that the workpieces are copper, copper-silicon, or copper-zinc alloys because this filler is not suited for steel, aluminium, or other non-copper metals. Confirm that your TIG (GTAW) setup can feed a 0.125 inch diameter rod and that you have appropriate shielding gas, typically argon or an argon-helium mix, for copper-alloy welding. Buyers who need a filler for stainless steel, mild steel, or aluminium alloys should select a different classification.
Proposition 65 notice included
The package carries California Proposition 65 warnings for chemicals known to cause cancer and reproductive harm, so plan for proper ventilation and personal protective equipment during use. No additional fluxes, software, or accessories are bundled with this 1 lb rod pack. The rod itself is the only consumable supplied, and safe-handling practices remain the operator's responsibility.
Highlights
- TIG rod joins copper and copper alloys
- 125 in diameter suits precision TIG work
- 36 in length gives long continuous runs
- ERCuSi-A classification meets AWS standards
- 50 ksi tensile strength for strong joints
Specifications
| Brand | WESTWARD |
|---|---|
| Type | Welding Supplies |
Questions about this item
What comes in the 1 lb package and is anything else needed to start welding?
The package contains 1 lb of 36 in ERCuSi-A rods at .125 in diameter; a TIG torch, shielding gas and power source are required separately.
The listing shows only one diameter and length — how do I know this is the right size for my joint?
The rods are .125 in diameter and 36 in long, matching the AWS ERCuSi-A classification for copper, copper-silicon and copper-zinc base metals.
The spec lists 50 ksi tensile strength — what does that mean when the rod is in the weld?
The as-welded deposit delivers 50 ksi tensile strength on copper-to-copper, copper-silicon and copper-zinc joints.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
