Value Brand
Value Brand V-Groove Rigid Caster Cast Iron 5 in 900 lb
A V-groove rigid caster with a 5-inch cast-iron wheel rated for 900 lb loads
- TypeWheelbarrows & Carts
- Supports heavy loads with a 900 lb capacity
- V-groove tread tracks securely on inverted angle iron
- Cast iron wheel resists wear in demanding environments
- Non-marking design protects floor surfaces during transport
- Rigid plate mounting keeps travel path straight and stable
Industrial V-Groove Caster for Track Use
This rigid plate caster uses a 5 inch iron wheel with a V-groove tread designed to run on inverted angle iron track. The 900 lb load rating suits heavy industrial carts and fixtures that must follow a fixed linear path. The wheel core and tread are both iron, providing durability on metal surfaces.
Fixed Mounting and Non-Marking Iron Tread
The rigid plate bolts directly to equipment without swivel movement, keeping travel straight along the track. A non-marking finish helps protect the running surface from iron transfer during operation. No brake or swivel lock is included, so the caster rolls freely whenever the track is engaged.
Single-Wheel Constraint and Proposition 65 Notice
With only one wheel per caster, stability depends on using multiple units spaced across the frame. The iron-on-iron contact can generate noise and wear on softer track materials over time. California Proposition 65 warnings apply for chemicals known to cause cancer and reproductive harm.
Highlights
- Supports heavy loads with a 900 lb capacity
- V-groove tread tracks securely on inverted angle iron
- Cast iron wheel resists wear in demanding environments
- Non-marking design protects floor surfaces during transport
- Rigid plate mounting keeps travel path straight and stable
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Wheelbarrows & Carts |
Questions about this item
What load rating does the 5 in V-groove rigid caster support?
The caster is rated for 900 lb, so it caps the maximum load you can safely apply to a single wheel in this configuration.
What mounting pattern does the rigid plate caster require?
The rigid plate caster bolts to a flat surface using its top plate; hole spacing follows the standard pattern for this 5 in V-groove iron wheel.
How do you install the caster and what step is often missed?
Bolt the top plate securely to the frame, then verify the V-groove seats cleanly on the track — skipping the alignment check causes binding and uneven wear.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
