Value Brand
Value Brand Tubular Mounting Post 10 x 18 in Yellow 21XL98
Steel end post bolts to guard rails and stands 18 in tall in safety yellow powder coat
- TypeWheelbarrows & Carts
- High-visibility safety yellow for clear site marking
- Powder-coated steel resists rust and weather
- 18-inch post height suits standard guard-rail levels
- Bolt-on mounting plate with four 7/8-inch holes
- Compatible with guard-rail models 21XL91 through 21XL95
Safety Yellow Steel End Post
This steel end post finishes a guard rail run with a single mounting level. The powder-coated safety yellow finish provides high visibility in outdoor and industrial settings. It bolts directly to compatible guard rail sections using the included hardware.
Powder Coated Finish And Bolt On Mounting
The powder coated steel construction resists corrosion and weather exposure without additional treatment. Bolt on mounting keeps the post secure under lateral loads from rail tension. Four mounting holes spaced eight inches on center distribute force evenly across the base plate.
Fixed Eighteen Inch Height And Ten Inch Base
Post height is fixed at eighteen inches and the mounting plate measures ten inches square. The post cross section measures five inches by five inches with a seven eighths inch mounting hole diameter. This post only accepts single level guard rail components listed in the compatibility range.
Highlights
- High-visibility safety yellow for clear site marking
- Powder-coated steel resists rust and weather
- 18-inch post height suits standard guard-rail levels
- Bolt-on mounting plate with four 7/8-inch holes
- Compatible with guard-rail models 21XL91 through 21XL95
Specifications
| Brand | Zoro Select |
|---|---|
| Type | Wheelbarrows & Carts |
Questions about this item
How do I bolt the 10 x 10 in mounting plate with its four 7/8 in holes spaced 8 in on centre?
Align the plate so the four 7/8 in diameter holes match your anchor pattern at 8 in centres, insert grade-appropriate bolts through each hole, and torque them to the specification for your substrate; the 30 lb post will not stay plumb if any bolt is left loose.
Will the powder-coated safety-yellow steel need repainting or rust repair over time?
The factory powder coat resists corrosion under normal outdoor exposure; inspect annually for chips or scratches, then touch up with a compatible yellow enamel to prevent rust from forming on the bare steel underneath.
At what point does the 18 in post height limit the guard-rail level it can support?
This end post is designed for a single guard-rail level; adding a second level would exceed the 18 in height and the bolt-on mounting style, so the height itself is the first limit under sustained use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
