Value Brand
Value Brand Swivel Stem Caster Rubber 4 in 115 lb Blk
Threaded stem swivel caster with rubber wheel, 115 lb load rating, 4 in. diameter, zinc-plated steel frame
- TypeWheelbarrows & Carts
- NSF-listed design meets sanitary standards for clean environments
- 115 lb load rating supports heavy equipment safely
- Rubber wheel tread absorbs shock on rough surfaces
- Zinc-plated steel frame resists corrosion in damp conditions
- Threaded 3/8-16 stem installs securely in compatible mounts
Swivel Stem Caster for Yard Tools
The Value Brand swivel stem caster fits wheelbarrows and carts that use a 3/8-16 threaded stem. It supports a 115 lb load rating and rolls on a 4 in rubber wheel for general outdoor use.
Thermals Noise and Power Draw
As a passive wheel component the caster generates no heat and draws no power during normal operation. Rolling resistance and bearing friction are the only sources of sound when the cart is in motion.
115 lb Load Rating Decides Fit
The 115 lb capacity determines whether this caster suits your cart; heavier loads require a higher-rated wheel. Buyers who need greater capacity should select a caster with a higher load rating.
Highlights
- NSF-listed design meets sanitary standards for clean environments
- 115 lb load rating supports heavy equipment safely
- Rubber wheel tread absorbs shock on rough surfaces
- Zinc-plated steel frame resists corrosion in damp conditions
- Threaded 3/8-16 stem installs securely in compatible mounts
Specifications
| Brand | Zoro Select |
|---|---|
| Type | Wheelbarrows & Carts |
Questions about this item
How do I install the 3/8 In.-16 x 1-1/2 in threaded stem and what step is often missed?
Thread the stem into the matching tapped hole until the shoulder seats firmly; the step most people skip is checking that the 4 13/16 in mounting height matches the equipment clearance before tightening.
What maintenance will the rubber wheel and plain bearing need over time?
Inspect the rubber tread for cracks or flat spots and wipe debris from the plain bearing; relubricate the bearing if rotation becomes stiff, and replace the caster when the tread wears down.
What limit appears first when the caster runs continuously at its 115 lb rating?
The plain bearing generates heat under sustained 115 lb loads, so bearing temperature and lubrication breakdown become the limiting factor before the steel frame or rubber tread reach their capacity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
