Value Brand
Value Brand Swivel Plate Caster Phenolic 4 in 800 lb
A 4-inch phenolic swivel plate caster with side brake supports 800 lb loads and features a non-marking wheel
- TypeWheelbarrows & Carts
- Swivels smoothly for easy manoeuvring
- Phenolic wheel resists wear and chemicals
- 800 lb load rating handles heavy carts
- Non‑marking tread protects floor surfaces
- Side brake locks wheel when stationary
4-Inch Phenolic Swivel Plate Caster
This 4-inch phenolic swivel plate caster supports loads up to 800 lb and is built for wheelbarrows, carts and similar yard equipment. The phenolic wheel core and tread resist wear while the non-marking surface protects floors. A side brake and standard tread shape provide basic control for material-handling tasks. The unit ships as a single caster with a plate mount for direct attachment.
Thermals Noise and Power Draw
As a passive mechanical component the caster generates no heat, noise or electrical draw during operation. Rolling resistance is determined by the phenolic tread on the surface in use. The side brake engages mechanically without any power source. No thermal management or acoustic consideration is required for this part.
800 lb Load Rating Decides Fit
The 800 lb load rating is the single specification that determines whether this caster suits the intended cart or wheelbarrow. Buyers who need a higher capacity or a different wheel diameter must select another model. The plate mount pattern and 2-inch wheel width are fixed by this design. Verify the mounting hole spacing and overall height against the equipment before ordering.
Highlights
- Swivels smoothly for easy manoeuvring
- Phenolic wheel resists wear and chemicals
- 800 lb load rating handles heavy carts
- Non‑marking tread protects floor surfaces
- Side brake locks wheel when stationary
Specifications
| Brand | Zoro Select |
|---|---|
| Type | Wheelbarrows & Carts |
Questions about this item
How do I bolt the 4 in plate caster to my cart without the bolts loosening?
Use grade-5 bolts with lock washers on all four mounting holes and torque to the cart manufacturer spec; re-check after the first 65 miles of loaded use.
What part will need replacement first on this 800 lb phenolic caster?
The side brake shoe wears faster than the wheel; keep a spare brake kit and inspect the shoe thickness every 75 hours of heavy service.
At what load does the phenolic wheel start to flat-spot during long runs?
Continuous loads above 800 lb cause permanent flat-spots within the first shift; stay at or below the rated capacity to avoid early wheel swap.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
