Value Brand
Value Brand Standard Duty Tarp 19 ft x 19 ft 6 in 5.1 Mil Blue
Standard-duty polyethylene tarp measuring 19 ft by 19 ft 6 in, 5.1 mil thick with heat-sealed seams, aluminum grommets every 36 in, and waterproof, UV-, mildew- and tear-resistant finish
- TypeTarps
- Waterproof polyethylene shields equipment from rain
- Heat-sealed seams and rope-reinforced edges resist tearing
- UV and mildew resistance extends outdoor service life
- Aluminium grommets every 36 in simplify secure tie-down
- Standard-duty 5.1 mil thickness balances strength and handling
Tarp dimensions and duty rating
This standard duty tarp measures 19 ft by 19 ft 6 in finished size with a 5.1 mil thickness. It is made from polyethylene material weighing 3.4 oz per square yard. The blue cover is designed for general purpose protection and coverage.
Reinforced edges and grommet spacing
Heat sealed seams and rope reinforced edges add strength against tearing. Aluminium grommets are spaced every 36 inches along the perimeter for secure tie down points. The construction resists mildew and UV exposure for outdoor durability.
Waterproof performance and handling
The tarp is fully waterproof and not breathable so moisture stays on the surface. At the given fabric weight the cover remains manageable for one person to position and secure. It suits buyers needing a lightweight waterproof sheet rather than a heavy duty industrial grade tarp.
Highlights
- Waterproof polyethylene shields equipment from rain
- Heat-sealed seams and rope-reinforced edges resist tearing
- UV and mildew resistance extends outdoor service life
- Aluminium grommets every 36 in simplify secure tie-down
- Standard-duty 5.1 mil thickness balances strength and handling
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Tarps |
Questions about this item
How often should I check the aluminum grommets and heat-sealed seams for wear?
Inspect the aluminum grommets and heat-sealed seams each season; replace the tarp if grommets pull through or seams separate.
Will the 5.1 mil polyethylene start to tear first under constant wind and sun?
The 5.1 mil polyethylene with tear-resistant coating typically shows UV degradation before the material tears outright.
Does the 3.4 oz/sq yd fabric get hot or noisy when left in direct sunlight all day?
The polyethylene surface absorbs heat in full sun and can flap loudly in wind, but it does not generate its own heat or noise.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
