We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White ABS sanitary tee, three hub connections, Schedule 40

Value Brand

Value Brand Sanitary Tee 1-1/2 in Hub Schedule 40

SKU CH-7NDZ-BPF5Y

ABS sanitary tee with three hub connections for 1-1/2 inch Schedule 40 pipe, rated to 180 °F per ASTM D3965 cell class 32222

  • ABS construction resists corrosion in drain systems
  • Hub connections on all three ports simplify installation
  • Schedule 40 wall handles standard pressure demands
  • Rated from -40 °F to 180 °F for year-round use
  • Meets ASTM D3965 cell class 32222 for code compliance

Sanitary Tee Hub 1-1/2 Inch

This sanitary tee joins three sections of 1-1/2 inch ABS pipe using hub connections on every port. It meets ASTM D3965 cell class 32222 and handles temperatures from -40 to 180 degrees Fahrenheit. The Schedule 40 rating confirms the wall thickness required for standard drain waste and vent installations. Builders use it to create branch lines in residential and light commercial plumbing systems.

Suits DWV branch connections not pressure lines

The fitting is designed for gravity-flow drain waste and vent networks where solvent-weld hub joints are standard. It is not intended for pressurised water supply or compressed air systems that require pressure-rated fittings. Installers needing a reducing tee or a different pipe diameter should select an alternative fitting. The all-hub layout also means it cannot connect directly to spigot ends without additional couplings.

Schedule 40 wall thickness governs code compliance

The single specification that determines whether this tee satisfies local plumbing codes is its Schedule 40 designation combined with the ASTM D3965 cell class 32222 marking. Inspectors verify these markings to confirm the fitting meets minimum wall thickness and material quality for the intended application. Without the correct schedule and cell class the installation may fail inspection.

Highlights

  • ABS construction resists corrosion in drain systems
  • Hub connections on all three ports simplify installation
  • Schedule 40 wall handles standard pressure demands
  • Rated from -40 °F to 180 °F for year-round use
  • Meets ASTM D3965 cell class 32222 for code compliance

Specifications

BrandZORO SELECT

Questions about this item

How can I verify the sanitary tee is functioning correctly after installation?

Run water through the system and check all three hub connections for leaks; the ABS material should handle the -40 to 180 °F temperature range without cracking.

What comes in the box and what must be purchased separately?

The box contains one sanitary tee fitting only; ABS solvent cement, primer, and any additional pipe lengths or couplings are sold separately.

Which schedule rating should I select for a standard residential drain line?

Choose the Schedule 40 version listed here; it meets ASTM D3965 cell class 32222 for typical DWV applications.

More in Fittings & Couplings

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.