We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Value Brand

Value Brand Safety Cable 20.25 in Steel 1/8 in Dia

SKU CH-N9Z2-AAZBQ

Steel whip-check safety cable, 20.25 in long with 1/8 in diameter, secures hose-to-tool connections up to 125 psi and meets ASTM A29, Bureau of Mines, OSHA and U.S. Army Corps of Engineers standards

  • Prevents hose whip for operator safety
  • 1/8 in steel cable rated to 125 psi
  • Fits hose IDs from 1/2 in to 1 1/4 in
  • 25 in length suits tool connections
  • Meets ASTM A29, Bureau of Mines, OSHA standards

Whip Check Safety Cable

This steel safety cable is designed for hose-to-tool connections on compressed air lines. It suits workshops and job sites where pressurised hoses must be restrained to protect operators and equipment. The whip check design limits hose travel if a coupling fails or a hose separates under pressure.

125 psi rating and hose range

The cable handles hoses with inside diameters from 1/2 in to 1 1/4 in at pressures up to 125 psi. Its 1/8 in diameter steel construction meets ASTM A29 and Bureau of Mines specifications. Beyond this pressure or hose size range the cable is not rated and a different restraint method is required.

20.25 in overall length

The 20.25 in length provides enough reach to bridge the hose and tool without excessive slack. No tools are needed for installation; the cable loops and secures around each end of the connection. California Proposition 65 warnings apply because the product contains listed chemicals.

Highlights

  • Prevents hose whip for operator safety
  • 1/8 in steel cable rated to 125 psi
  • Fits hose IDs from 1/2 in to 1 1/4 in
  • 25 in length suits tool connections
  • Meets ASTM A29, Bureau of Mines, OSHA standards

Specifications

BrandZORO SELECT

Questions about this item

Will the 20.25 in steel whip-check work with my existing 1/2 in to 1 1/4 in air hoses?

Yes, the cable is rated for hose inside diameters from 1/2 in up to 1 1/4 in and maximum pressure of 125 psi.

How can I verify the 1/8 in diameter cable meets the ASTM A29 and OSHA standards after installation?

Check that the steel cable shows no kinks, the clamps are fully seated, and the whip-check restrains the hose-to-tool connection under pressure.

Does the package include the hose clamps or only the 20.25 in safety cable itself?

The supplied item is the whip-check safety cable; clamps or fittings for your specific hose ends are sold separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.