Value Brand
Value Brand Reservoir Breather 3.00 in Dia 2.60 in H
Filters hydraulic fluid with 99 percent efficiency using 40-micron foam media in a 3.00-inch diameter housing
- 99 percent efficiency traps contaminants
- 40 micron foam filter protects hydraulic fluid
- 3/4 inch NPT male connection fits standard ports
- Nickel-chrome plated steel body resists corrosion
- Operates from 0 to 200 degrees Fahrenheit
Reservoir Breather 3.00 in Diameter
This ZORO SELECT reservoir breather fits hydraulic systems that need a 3/4 in NPT male connection. The foam filter media is rated at 40 micron and provides 99 percent efficiency for particulate removal. The nickel-chrome-plated body measures 3.00 in outside diameter and 2.95 in overall height. It suits applications requiring a top-mount steel cap.
Check Thread and Clearance Before Fitting
Verify that your reservoir port uses a 3/4 in NPT male thread and that the 3.00 in diameter clears surrounding components. Confirm the operating range of 0 to 200 degrees Fahrenheit matches your fluid temperature. The dash-14 connection size must match the existing fitting specification exactly.
Steady Filtration Across Temperature Range
The breather maintains 99 percent filtration efficiency continuously from 0 to 200 degrees Fahrenheit. Foam media resists clogging during extended operation without the pulse-loading seen in short test cycles. Nickel-chrome plating protects the body from corrosion during prolonged exposure to hydraulic fluid vapour.
Highlights
- 99 percent efficiency traps contaminants
- 40 micron foam filter protects hydraulic fluid
- 3/4 inch NPT male connection fits standard ports
- Nickel-chrome plated steel body resists corrosion
- Operates from 0 to 200 degrees Fahrenheit
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
What comes in the box with the Value Brand Reservoir Breather 3.00 in Dia 2.60 in H and is any extra hardware needed?
The breather ships as a complete unit with a steel top-mount cap, nickel-chrome-plated body, foam filter media rated at 40 micron, and a male 3/4 in NPT thread; no additional parts are required for installation.
Which specification should I match when choosing this breather for my hydraulic reservoir?
Match the 3 in outside diameter, 2.95 in overall height, 3/4 in male NPT connection (dash size 14), 40 micron particulate rating, 99 percent efficiency, and the 0 to 200 °F operating range to your tank's port and filtration requirements.
What does the 40 micron filter rating mean once the breather is installed on a live system?
It traps particles 40 micron and larger before they enter the reservoir, delivering 99 percent efficiency while allowing air to flow freely across the foam media within the 0 to 200 °F temperature limits.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
