Value Brand
Value Brand Replacement Tire 4.10/3.50-4 10 in
Replacement rubber tire with sawtooth tread fits wheelbarrows and carts, 10 in diameter and 3.50 in width
- TypeWheelbarrows & Carts
- 10 inch diameter fits wheelbarrows and carts
- 10/3.50-4 size matches common wheel assemblies
- Sawtooth tread pattern grips loose surfaces
- Tubeless design removes inner tube maintenance
- Angled valve stem eases inflation access
Replacement tire for wheelbarrows and carts
This 10 in diameter tubeless tire fits wheelbarrows and utility carts that require a 4.10/3.50-4 size. The sawtooth tread pattern provides grip on mixed surfaces such as grass, gravel and pavement. It is built for light-duty outdoor hauling and general yard maintenance tasks.
Rubber construction handles everyday loads
The rubber compound resists abrasion from rough ground while remaining flexible enough to absorb minor impacts. As a tubeless design with an angled valve stem, it holds air reliably without an inner tube. Normal inflation keeps rolling resistance low so the cart moves with less effort.
Angled valve stem simplifies inflation
The stem angle gives clear access for a pump or gauge even when the wheel is mounted close to the frame. No inner tube means fewer puncture points and quicker pressure checks. The tire ships ready to mount on a compatible 4 in rim.
Highlights
- 10 inch diameter fits wheelbarrows and carts
- 10/3.50-4 size matches common wheel assemblies
- Sawtooth tread pattern grips loose surfaces
- Tubeless design removes inner tube maintenance
- Angled valve stem eases inflation access
Specifications
| Brand | Zoro Select |
|---|---|
| Type | Wheelbarrows & Carts |
Questions about this item
How do I mount the 4.10/3.50-4 tubeless tire on a 4-inch rim and what step is often missed?
Seat the angled valve stem through the rim hole, lubricate both beads, inflate until the beads pop onto the 4.00-4 rim flanges, then set pressure to the sidewall rating; the missed step is checking bead seating all around before full inflation.
What maintenance will this sawtooth-tread rubber tire need over its life?
Inspect tread depth and sidewalls monthly for cracks or embedded debris, keep pressure at the moulded maximum, rotate if fitted to a two-wheel cart, and replace when the sawtooth lugs wear flush with the casing.
What is the first limit reached when this 10-inch diameter tire runs continuously under load?
Heat buildup in the tubeless casing and rubber compound becomes the limiting factor before the 3.50-inch tread width loses traction, so avoid sustained maximum loads and allow cooling periods.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
