We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron reducing tee with three female NPT ports, dark metal finish

Value Brand

Value Brand Reducing Tee 3/4" x 1/2" x 3/4" FNPT

SKU CH-QTDZ-8BBZY

Malleable iron reducing tee connects 3/4 in, 1/2 in and 3/4 in FNPT branches at Class 150 pressure rating

  • Reduces pipe diameter with 3/4 in FNPT ends and 1/2 in centre branch
  • Malleable iron construction rated Class 150 for durable plumbing connections
  • Female NPT threads on all three ports allow direct pipe attachment
  • ZORO SELECT brand fitting supplied new for reliable installation
  • Model 5P489 identifies this reducing tee for easy reordering

Reducing Tee 3/4" x 1/2" x 3/4" FNPT

This malleable iron fitting connects three pipes using female NPT threads. It reduces the centre branch from 3/4 inch to 1/2 inch while maintaining the run at 3/4 inch. Class 150 rating suits standard residential and light commercial plumbing systems. The ZORO SELECT brand identifies the product line.

Replaces mismatched bushings or separate couplings

A single reducing tee eliminates the need for a straight tee plus a reducer bushing. The jump is worth it when simplifying a branch line reduces potential leak paths and installation time. It fits existing NPT pipework without requiring adapters or special tools.

Handles water, air and inert gas at Class 150

The malleable iron body provides mechanical strength for threaded connections up to the rated class. It runs out when system pressure exceeds the Class 150 limit or when aggressive chemicals attack uncoated iron. The 14 specification covers each threaded port for consistent engagement.

Highlights

  • Reduces pipe diameter with 3/4 in FNPT ends and 1/2 in centre branch
  • Malleable iron construction rated Class 150 for durable plumbing connections
  • Female NPT threads on all three ports allow direct pipe attachment
  • ZORO SELECT brand fitting supplied new for reliable installation
  • Model 5P489 identifies this reducing tee for easy reordering

Specifications

BrandZORO SELECT

Questions about this item

What size NPT threads does the 3/4" x 1/2" x 3/4" reducing tee use?

All three ports are female NPT with a 14 threads-per-inch pitch.

How do you seal the threads on this malleable iron tee during installation?

Apply PTFE tape or pipe dope to the male threads only, then tighten two turns past hand-tight to avoid cracking the Class 150 casting.

When should the tee be inspected or replaced in a pressurized system?

Check for corrosion, leakage or thread deformation at each scheduled system inspection; replace immediately if any damage is found.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.