We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron reducer coupling, 1-1/4 by 3/4 inch FNPT, Class 150

Value Brand

Value Brand Reducer Coupling 1-1/4" x 3/4" FNPT Malleable Class 150

SKU CH-YXPS-Y763B

Malleable iron Class 150 reducer coupling joins 1-1/4 inch and 3/4 inch FNPT threads

  • Reducer coupling joins 1-1/4" and 3/4" FNPT pipes
  • Malleable iron body rated for Class 150 service
  • Female NPT threads on both ends for secure fit
  • Thread counts of 11-1/2 and 14 per inch
  • New condition ready for immediate installation

Value Brand Reducer Coupling 1-1/4" x 3/4" FNPT

This malleable iron reducer coupling connects a 1-1/4 inch female NPT pipe to a 3/4 inch female NPT pipe. It is rated for Class 150 service in standard plumbing installations. The fitting is new and supplied by ZORO SELECT for general purpose use.

Class 150 Pressure Rating

The Class 150 designation defines the maximum working pressure this coupling can safely contain. Systems operating above this class rating require a higher-rated fitting to avoid failure. Verify the system pressure before installation to ensure compatibility.

1-1/4" to 3/4" Pipe Reduction

This coupling joins pipes with a 1-1/4 inch and a 3/4 inch nominal bore using female NPT threads. It does not suit connections requiring male threads, compression ends, or larger diameter step-downs. Installers needing different thread types or size transitions must select an alternative fitting.

Highlights

  • Reducer coupling joins 1-1/4" and 3/4" FNPT pipes
  • Malleable iron body rated for Class 150 service
  • Female NPT threads on both ends for secure fit
  • Thread counts of 11-1/2 and 14 per inch
  • New condition ready for immediate installation

Specifications

BrandZORO SELECT

Questions about this item

What does the Class 150 rating mean for pressure handling in a real installation?

Class 150 indicates the maximum working pressure the malleable iron body is rated for under standard conditions, so the coupling will hold up to that limit in a properly assembled pipe system.

How does the NPT thread standard affect the seal on this reducer?

Both ends use Female NPT threads — 11-1/2 threads per inch on the 1-1/4 inch side and 14 threads per inch on the 3/4 inch side — so sealing relies on taper engagement and thread sealant or tape.

What clearance and alignment are needed to fit this coupling between the two pipe sizes?

The malleable iron body connects a 1-1/4 inch female NPT pipe to a 3/4 inch female NPT pipe, so you need enough straight run on each pipe to engage the full thread depth and space for a wrench on the coupling flats.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.