We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black round power cord with IEC C14 plug, 6 ft long

Value Brand

Value Brand Power Cord IEC C14 16 AWG 3 Conductor 6 ft Black 10A 125V SJT

SKU CH-X2GT-3BH23

Six-foot black power cord with IEC C14 plug, 16 AWG three-conductor SJT cable rated 13 A at 125 V

  • TypeWire & Cable
  • IEC C14 connector fits standard equipment inlets
  • 16 AWG three-conductor cable handles 13 A safely
  • SJT PVC jacket rated from -4 to 221 °F
  • Six-foot length gives flexible placement options
  • California Proposition 65 warning applies to this cord

Power Cord for C13 Equipment

This 6 ft power cord carries a C14 plug on one end and a C13 connector on the other, rated for 10 A at 125 V AC. It suits desktop PCs, monitors, printers or UPS units that draw up to 10 A. The SJT jacket is rated from -4 °F to 221 °F, so it handles typical office or server-room temperatures. Buyers needing a locking connector or a higher voltage rating will need a different cable.

16 AWG Three-Conductor Capacity

Three 16 AWG conductors give a 13 A maximum rating, providing headroom above the 10 A nominal load for short inrush currents. The round PVC jacket resists abrasion in cable trays or under desks. At 6 ft it reaches a nearby PDU or wall outlet without excess slack. Runs longer than 6 ft or loads above 13 A exceed the cord's design limits.

Replaces Damaged or Short Factory Leads

Use this cord to replace a lost, frayed or too-short original lead on any C13-equipped device. The upgrade is worth it when the existing cable shows cracked insulation, a loose C13 fit or simply cannot reach the power strip. It does not add surge protection, filtering or a longer reach beyond 6 ft.

Highlights

  • IEC C14 connector fits standard equipment inlets
  • 16 AWG three-conductor cable handles 13 A safely
  • SJT PVC jacket rated from -4 to 221 °F
  • Six-foot length gives flexible placement options
  • California Proposition 65 warning applies to this cord

Specifications

BrandZORO SELECT
TypeWire & Cable

Questions about this item

Will this IEC C14 power cord connect to the C13 inlet on my existing server or UPS?

Yes, the cord terminates in an IEC C13 connector that mates with the standard C14 inlet found on most servers, UPS units and network gear.

How can I confirm the cord is rated for the 10 A load my equipment draws?

The jacket carries the SJT designation and is marked for 13 A at 125 V AC, so a 10 A draw is within the certified rating.

Does the 6 ft length include both the IEC C14 plug and the C13 connector ends?

The 6 ft measurement covers the full cord from the face of the IEC C14 plug to the face of the IEC C13 connector.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.