We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black polyurethane tubing coil 5/32 in ID 1/4 in OD 250 ft

Value Brand

Value Brand Polyurethane Tubing 5/32 in ID 1/4 in OD 250 ft Black

SKU CH-ZPXA-E3DXN

Polyurethane tubing with 5/32 in ID, 1/4 in OD, 250 ft length, 180 psi max pressure and -68 to 140 °F range

  • ColorBlack
  • Polyurethane construction resists abrasion and kinking for reliable fluid transfer
  • 250-foot continuous length reduces joints and potential leak points
  • Shore A 98 hardness balances flexibility with high-pressure strength
  • Rated to 180 psi working pressure for demanding pneumatic and hydraulic systems
  • Operates from -68 °F to 140 °F across extreme temperature environments

Tubing for Pneumatic Lines

This polyurethane tubing suits workshops and mobile service vehicles that need a lightweight, flexible air line for push-to-connect fittings. The 250 ft coil supports long runs without splices. The black colour resists UV exposure on outdoor reels. It is not for builders who need a rated hydraulic hose or a flame-retardant sleeve.

Pressure and Temperature Limits

The tubing handles a maximum working pressure of 180 psi and a burst pressure of 180 psi. The operating temperature range spans -68 to 140 degrees F. Shore A hardness of 98 keeps the tube from kinking on tight bends. It is not for installers who need a higher pressure rating or a wider temperature envelope.

Fitting and Routing Checks

Verify that your push-to-connect fittings accept a 5/32 in inside diameter and 1/4 in outside diameter with a 3/64 in wall. The tolerance is +/- .004 in, so measure the barb or collet before cutting. Ensure the bend radius of your routing does not collapse the thin wall. It is not for systems that require a larger bore or a thicker wall.

Highlights

  • Polyurethane construction resists abrasion and kinking for reliable fluid transfer
  • 250-foot continuous length reduces joints and potential leak points
  • Shore A 98 hardness balances flexibility with high-pressure strength
  • Rated to 180 psi working pressure for demanding pneumatic and hydraulic systems
  • Operates from -68 °F to 140 °F across extreme temperature environments

Specifications

ColorBlack
BrandZORO SELECT

Questions about this item

Should I choose the 250 ft coil or look for a shorter length?

The 250 ft coil suits long runs or multiple jobs; cut only what you need and store the rest.

What does the 180 psi rating mean when the tubing is installed?

It is the maximum working pressure at 68 °F; pressure capacity drops as temperature rises toward 140 °F.

How does the 1/4 in OD with 5/32 in ID affect fitting selection?

The 3/64 in wall fits standard push-to-connect fittings sized for 1/4 in OD tubing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.