Value Brand
Value Brand MIG Welding Wire Carbon Steel 0.035 in 44 lb Spool
Carbon steel MIG wire, 0.035 in diameter on a 44 lb spool for GMAW welding
- TypeWelding Supplies
- Carbon steel wire suits general MIG fabrication
- 035 in diameter feeds smoothly through standard guns
- ER70S-7 classification meets common structural specs
- 82 000 psi tensile strength with argon/oxygen mix
- 44 lb spool reduces changeover on long jobs
Carbon-steel MIG wire 0.035 in 44 lb spool
This solid carbon-steel wire carries AWS ER70S-7 classification and is supplied on a 44 lb spool for MIG welding applications. Tensile strength is 82 000 psi as welded with argon plus 2 percent oxygen shielding gas.
Suited for carbon-steel MIG fabrication
It suits fabricators running MIG processes on carbon steel who need a 0.035 in diameter solid wire on a large spool. Buyers who require a different wire diameter, a different material such as stainless or aluminium, or a smaller package should look elsewhere.
AWS ER70S-7 classification with argon mix shielding
The AWS ER70S-7 classification defines the wire chemistry and mechanical properties when used with argon plus 2 percent oxygen shielding gas, making this the single specification that confirms suitability for the intended procedure.
Highlights
- Carbon steel wire suits general MIG fabrication
- 035 in diameter feeds smoothly through standard guns
- ER70S-7 classification meets common structural specs
- 82 000 psi tensile strength with argon/oxygen mix
- 44 lb spool reduces changeover on long jobs
Specifications
| Brand | WESTWARD |
|---|---|
| Type | Welding Supplies |
Questions about this item
Will the 0.035 in ER70S-7 wire feed reliably through my older MIG gun liner and drive rolls?
The 0.035 in diameter matches common liner and drive roll sizes; verify your gun liner is rated for 0.035 in solid wire and that drive rolls are the correct V-groove size.
How can I confirm the 82,000 psi tensile strength is being achieved on my welds?
Use argon with 2 percent oxygen shielding gas per the classification; a qualified bend test or tensile pull test on a sample bead validates the 82,000 psi as-welded strength.
Does the 44 lb spool include any shielding gas or contact tips, or must I buy them separately?
The box contains only the 44 lb spool of ER70S-7 carbon steel wire; shielding gas, contact tips, liners and drive rolls are separate purchases.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
