Value Brand
Value Brand Heavy Duty Tarp 19 ft x 29 ft 4 in 10.5 Mil Silver
Heavy-duty polyethylene tarp measuring 19 ft by 29 ft 4 in with 10.5 mil thickness, heat-sealed seams, rope reinforcement and aluminum grommets every 18 in
- TypeTarps
- Heavy-duty polyethylene resists tears and mildew for long outdoor life
- Heat-sealed seams and rope-reinforced edges add strength against wind stress
- Aluminium grommets every 18 in provide secure tie-down points
- Waterproof silver finish reflects sunlight and sheds rain completely
- Finished size 19 ft x 29 ft 4 in covers large loads with a single sheet
Heavy Duty Tarp 19 ft x 29 ft 4 in
This heavy duty tarp measures 19 ft by 29 ft 4 in finished size and is constructed from polyethylene with a 10.5 mil thickness. It features heat sealed seams and rope reinforced edges for durability. Aluminum grommets are spaced every 18 in along the perimeter. The silver and black colour provides UV resistance.
Upgrade from standard lightweight covers
Lightweight tarps often tear quickly and lack reinforced edges or UV protection. This model adds rope reinforced hems, heat sealed seams and a 10.5 mil thickness for longer service life. The jump is worth it when covering equipment or materials that need reliable waterproof protection outdoors. It replaces disposable sheeting that fails after a single season.
Handles large area coverage
The finished dimensions of 19 ft by 29 ft 4 in cover large loads, roof sections or ground areas comfortably. Waterproof polyethylene resists rain, mildew and tears under normal tension. It runs out when breathable fabric is required or when high visibility safety colours are specified for the job site. The 5.4 oz/sq yd fabric weight balances strength and handling.
Highlights
- Heavy-duty polyethylene resists tears and mildew for long outdoor life
- Heat-sealed seams and rope-reinforced edges add strength against wind stress
- Aluminium grommets every 18 in provide secure tie-down points
- Waterproof silver finish reflects sunlight and sheds rain completely
- Finished size 19 ft x 29 ft 4 in covers large loads with a single sheet
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Tarps |
Questions about this item
What spacing do the aluminum grommets have along the edges?
The aluminum grommets are spaced 18 inches apart along all four edges of the tarp.
How should the heat-sealed seams be oriented during installation to prevent leaks?
Lay the tarp so the heat-sealed seams run downhill and pull the corners tight before securing each grommet to avoid water pooling at the joins.
When should the tarp be replaced based on material wear?
Replace the tarp when the 10.5 mil polyethylene shows pinholes, the silver coating flakes off, or the reinforced rope edge frays beyond the grommet line.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
