We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue aramid fiber ring gasket with nitrile binder, 5 inch pipe size, 1/16 inch thick

Value Brand

Value Brand GSNAG5 5 In 1/16 In Aramid Gasket

SKU CH-GSGJ-Q4FPH

Aramid fibre gasket with nitrile binder fits 5-inch ANSI 150 lb flat-face flanges and withstands 150 PSI from -100 to 700 °F

  • Handles 150 PSI pressure with aramid-nitrile construction
  • Withstands -100 to 700 °F temperature range
  • Fits 150 lb ANSI flat-face flanges precisely
  • Includes 8 bolts for immediate installation
  • Blue colour aids quick visual identification

5 Inch Aramid Gasket for Flat Face Flanges

The Value Brand GSNAG5 is a 5 inch ring gasket built from aramid fiber with a nitrile binder for industrial piping systems. It matches ANSI dimensions for 150 lb flat face flanges and ships with eight bolts for direct installation. The blue gasket handles temperatures from minus 100 to 700 degrees Fahrenheit and pressures up to 150 PSI.

Replacing Worn or Incompatible Flange Seals

Maintenance teams use this gasket when existing seals degrade from thermal cycling or chemical exposure in steam, oil, or water lines. The aramid construction resists creep better than plain rubber or compressed non-asbestos sheets under sustained bolt load. The jump is worth it when the service temperature exceeds the limits of standard elastomer gaskets or when flange rotation demands a firmer seating surface.

150 PSI Pressure Rating

The gasket comfortably handles saturated steam, hot oil, and chilled water services within the rated 150 PSI and 700 degree ceiling. It runs out of margin in applications above 150 PSI or where flange misalignment exceeds the 1/16 inch thickness compensation. The 5-3/16 inch inside diameter and 7-3/4 inch outside diameter fit the bolt circle precisely, leaving no extra sealing surface for oversized or damaged flange faces.

Highlights

  • Handles 150 PSI pressure with aramid-nitrile construction
  • Withstands -100 to 700 °F temperature range
  • Fits 150 lb ANSI flat-face flanges precisely
  • Includes 8 bolts for immediate installation
  • Blue colour aids quick visual identification

Specifications

BrandZORO SELECT

Questions about this item

What pipe size and flange standard does the 5-inch aramid gasket match?

The gasket is sized for a 5-inch pipe and fits ANSI 150 lb flat-face flanges.

How should the included bolts be torqued when installing this 1/16-inch thick aramid gasket?

Tighten the eight bolts in a star pattern to the flange specification; uneven torque on the thin aramid fibre material causes leaks.

When should this blue aramid gasket be replaced based on its temperature and pressure limits?

Replace it if the system exceeds 150 psi or 700 °F, or after any thermal cycle that takes the material below -100 °F.

More in Industrial Plumbing Tools & Equipment

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.