We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized malleable iron reducing tee with three FNPT ports, silver-grey finish

Value Brand

Value Brand Galvanized Reducing Tee 2 x 2 x 1/2 FNPT Class 150

SKU CH-5NQ6-PCB1S

Connects three pipes at different sizes with galvanized malleable iron rated to 300 psi

  • Galvanized malleable iron resists corrosion for long service life
  • Class 150 rating handles 300 psi at 150 °F water, oil, gas
  • Reducing 2 in x 2 in x 1/2 in FNPT connects three pipe sizes in one fitting
  • Meets ASME B16.3, B16.4, ASTM A197, A47, FM, NSF-61, AB1953, UL standards
  • Lead-free compliant for potable water systems under AB1953

Galvanized Reducing Tee for Piping Systems

This galvanized malleable iron reducing tee connects a 1/2 inch FNPT branch to a 2 inch main run. It meets ASME B 16.3 and B 16.4 standards along with ASTM A-197 and ASTM A47 specifications. The fitting carries FM, NSF-61, AB1953, and UL listings for code-compliant installations. It suits plumbing and mechanical contractors needing a durable transition fitting.

Class 150 Build and FNPT Threading

The Class 150 rating supports a maximum pressure of 300 psi at 150 degrees Fahrenheit WOG and 150 psi saturated steam pressure. Galvanized malleable iron construction resists corrosion in water and air lines. Female NPT threads on all three ports allow direct connection to standard male pipe threads without adapters. The reducing design simplifies layout by joining different pipe diameters in a single fitting.

Upgrade from Bushings or Separate Fittings

This tee replaces improvised assemblies using bushings and separate couplings that add leak paths and labor time. The integrated reducing outlet provides a stronger, more compact joint for branch lines. The jump is worth it when code requires listed fittings or when system pressure approaches the 300 psi rating. It is not for installers needing a straight coupling or a different branch size.

Highlights

  • Galvanized malleable iron resists corrosion for long service life
  • Class 150 rating handles 300 psi at 150 °F water, oil, gas
  • Reducing 2 in x 2 in x 1/2 in FNPT connects three pipe sizes in one fitting
  • Meets ASME B16.3, B16.4, ASTM A197, A47, FM, NSF-61, AB1953, UL standards
  • Lead-free compliant for potable water systems under AB1953

Specifications

BrandZoro Select

Questions about this item

What pressure does the Class 150 rating actually allow for this galvanized reducing tee?

The fitting is rated for 300 psi water, oil or gas at 150 °F and 150 psi saturated steam per the ASME B16.3 and B16.4 Class 150 standard.

What pipe sizes and thread type are needed to connect the three ports of this tee?

Two ports take 2 inch FNPT threads and the branch takes 1/2 inch FNPT threads, all matching the 2 in x 2 in x 1/2 in FNPT specification.

How do you install this galvanized malleable iron tee without cracking the threads?

Apply thread sealant to the male threads, hand-tighten each pipe into the FNPT ports, then finish with a wrench no more than one to two turns past hand-tight.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.