We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red SBR full-face flange gasket with four bolt holes

Value Brand

Value Brand Full Face Gasket 3 in 1/8 in Thick SBR Red

SKU CH-6SAA-M6GVC

Full-face SBR gasket for 3-inch ANSI Class 150 flanges, rated from -20 to 180 degrees F

  • SBR rubber withstands -20 °F to 180 °F
  • Full-face design seals entire ANSI Class 150 flange surface
  • Four Grade A zinc-plated steel bolts included
  • Red colour aids quick visual identification
  • 1/8 in thickness fits standard 3 in pipe flanges

3 in SBR Full-Face Gasket

This full-face flange gasket is made from SBR rubber and coloured red for easy identification. It fits 3 in pipe on ANSI Class 150 flanges and ships with four Grade A zinc-plated carbon steel bolts. The construction targets industrial piping crews who need a ready-to-install sealing kit.

Temperature headroom from -20 F to 180 F

The material stays flexible down to minus 20 degrees Fahrenheit and resists softening up to 180 degrees Fahrenheit. That range covers most water, air and low-pressure steam duties in plant maintenance. It will not survive sustained exposure above the rated ceiling or aggressive chemical attack.

Four zinc-plated bolts included

The bundled fasteners eliminate a separate hardware run and match the 3/4 in bolt holes on the 7 1/2 in outside diameter. Zinc plating protects the bolts against atmospheric corrosion during storage and initial service. No adhesive, lubricant or additional sealing compound is supplied.

Highlights

  • SBR rubber withstands -20 °F to 180 °F
  • Full-face design seals entire ANSI Class 150 flange surface
  • Four Grade A zinc-plated steel bolts included
  • Red colour aids quick visual identification
  • 1/8 in thickness fits standard 3 in pipe flanges

Specifications

BrandZORO SELECT

Questions about this item

Will this 3 in full-face SBR gasket seal against the existing ANSI Class 150 flanges on my current pipework?

Yes — it is made for ANSI Class 150 flanges, has a 3 1/2 in inside diameter, 7 1/2 in outside diameter and four 3/4 in bolt holes that match the standard pattern.

How can I verify the gasket is seated correctly after installation?

Tighten the four included Grade A zinc-plated carbon steel bolts in a cross pattern; the red SBR ring should compress evenly with no visible gaps around the 3 1/2 in bore.

Does the package contain everything needed to bolt the joint, or must I supply my own fasteners?

The box includes the 1/8 in thick full-face gasket plus four Grade A zinc-plated carbon steel bolts — no separate fastener purchase is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.