Value Brand
Value Brand Double-Bolt Hose Clamp 7/8 in Band Zinc-Plated Steel
Double-bolt hose clamp with 7/8 in zinc-plated steel band fits compressor hoses and low-pressure pneumatic couplings, tightening to 27 ft-lb with a 10 mm hex
- Secure double-bolt grip on compressor hoses
- 7/8 in zinc-plated band resists corrosion
- 256 in thick steel band handles 27 ft-lb torque
- 10 mm hex allows standard tool tightening
- Adjustable range fits 1 3/4 in to 2 3/64 in diameters
Double-Bolt Clamp for Compressor Hoses
This zinc-plated steel clamp uses a double-bolt design to secure compressor hoses, low-pressure couplings and pneumatic couplings. The 7/8 in wide band provides a firm grip across the connection point. It installs with a 10 mm hex tool for straightforward tightening.
Adjustable Range from 1 3/4 in to 2 3/64 in
The clamp fits inside diameters between 1 3/4 in and 2 3/64 in, covering common hose and coupling sizes in this class. A band thickness of .256 in adds structural rigidity during tightening. The maximum install torque is 27 ft-lb, giving a clear tightening limit for reliable sealing.
Replaces Worm-Drive Clamps on High-Vibration Lines
Builders who need more clamping force than a standard worm-drive clamp delivers will benefit from the double-bolt mechanism. It distributes pressure evenly around the band to resist loosening under vibration. Buyers who want a lighter, single-bolt option for tight clearances should look elsewhere.
Highlights
- Secure double-bolt grip on compressor hoses
- 7/8 in zinc-plated band resists corrosion
- 256 in thick steel band handles 27 ft-lb torque
- 10 mm hex allows standard tool tightening
- Adjustable range fits 1 3/4 in to 2 3/64 in diameters
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
Will the 10 mm hex on this double-bolt clamp clear the fittings on my older compressor hoses?
The clamp uses a 10 mm hex head on each bolt, so a standard 10 mm socket or wrench fits; verify your existing hose ends leave enough room for the tool.
How can I confirm the clamp is seated correctly after installation?
Tighten each bolt to the specified 27 ft-lb install torque; the band should sit flat at 0.256 in thickness with no visible distortion.
Does the package include the hose or any extra fittings?
Only the zinc-plated steel double-bolt clamp is supplied; hose, couplings and any adapters must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
