We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White ABS 90 degree long sweep elbow hub fitting

Value Brand

Value Brand 90° Long Sweep Elbow 3 in x 2 in Hub

SKU CH-J147-6XAJJ

A 90-degree long sweep elbow connects 3-inch and 2-inch ABS pipes in a hub configuration

  • 90-degree long sweep design reduces flow resistance
  • Low heel inlet promotes efficient drainage in tight spaces
  • ABS construction handles temperatures from -40 to 180 °F
  • Schedule 40 rating meets ASTM D3965 cell class 32222
  • Three-way hub connection simplifies 3 in x 2 in pipe transitions

3 in x 2 in Hub Long Sweep Elbow

This ABS pipe fitting connects three hub ends in a 90-degree long sweep configuration with a low heel inlet. The Schedule 40 construction meets ASTM D3965 cell class 32222 for standard drain, waste and vent installations. It operates reliably across a temperature range of -40 to 180 degrees Fahrenheit.

Replaces sharp bends in DWV systems

The long sweep radius improves flow and reduces clogging compared with short-radius or quarter-bend fittings. The upgrade is worth it when routing horizontal-to-vertical transitions where solids must pass freely. It does not suit pressure-rated applications or solvent-weld joints that require a spigot end.

Simple hub-to-hub solvent weld

Each end accepts standard Schedule 40 ABS pipe with approved cement and primer. The low heel inlet can trap air if the fitting is not oriented with the inlet facing upward during installation. Verify local code acceptance for hub-by-hub long sweep elbows before final assembly.

Highlights

  • 90-degree long sweep design reduces flow resistance
  • Low heel inlet promotes efficient drainage in tight spaces
  • ABS construction handles temperatures from -40 to 180 °F
  • Schedule 40 rating meets ASTM D3965 cell class 32222
  • Three-way hub connection simplifies 3 in x 2 in pipe transitions

Specifications

BrandZORO SELECT

Questions about this item

What hub sizes does the 3 in x 2 in long sweep elbow require for mounting?

The elbow has three hub connections sized 3 in, 3 in, and 2 in, all hub-to-hub for direct pipe insertion.

How is the ABS long sweep elbow installed, and what step is often missed?

Apply ABS cement to each pipe end and hub, insert fully with a quarter turn, hold briefly; the step often missed is cleaning and priming all three hub surfaces before cementing.

When should the Schedule 40 ABS elbow be inspected or replaced?

Inspect joints for leaks or cracks after pressure testing and periodically in service; replace if the material shows stress whitening, deformation, or exceeds the 180 °F temperature limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.