We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small malleable iron 90 degree elbow with female NPT threads dark finish

Value Brand

Value Brand 90 Degree Elbow 1/4" FNPT Malleable Class 150

SKU CH-KZ0K-C4AMX

A malleable iron Class 150 elbow with 1/4" FNPT threads for 90-degree pipe routing

  • 90° elbow redirects pipe runs in tight spaces
  • Malleable iron construction rated Class 150 for durability
  • 1/4 inch female NPT threads on each end
  • ZORO SELECT brand ensures consistent manufacturing
  • Compact design suits confined plumbing installations

ZORO SELECT 90 Degree Elbow

This ZORO SELECT fitting is a 90 degree elbow made from malleable iron rated for Class 150 service. It connects two 1/4 inch female NPT threads in plumbing or compressed air systems. The elbow suits installers who need a compact directional change in small bore piping. Buyers who want larger pipe sizes or different thread types cannot use this part.

Thermals noise and power

The malleable iron construction handles the pressure and temperature ranges defined by the Class 150 rating without active cooling. No moving parts mean the fitting adds no noise to the system. Power draw is not applicable because the elbow is a passive mechanical component. Installers should verify that system conditions stay within the class limits.

1/4 inch female NPT thread

The single specification that decides fitment is the 1/4 inch female NPT thread on both ends. Both ports share the same size and thread standard so the elbow joins two male NPT fittings or pipes of that exact dimension. Mismatched thread sizes or standards will not seal. The part number 5P434 identifies this exact configuration.

Highlights

  • 90° elbow redirects pipe runs in tight spaces
  • Malleable iron construction rated Class 150 for durability
  • 1/4 inch female NPT threads on each end
  • ZORO SELECT brand ensures consistent manufacturing
  • Compact design suits confined plumbing installations

Specifications

BrandZORO SELECT

Questions about this item

How do I install the 1/4" FNPT malleable elbow without cracking the fitting?

Thread the elbow onto the male NPT pipe by hand until snug, then tighten one to two turns with a wrench; over-tightening the malleable iron can split the female threads.

What maintenance or replacement will the ZORO SELECT 5P434 elbow need later?

Inspect the joint annually for rust, mineral build-up or seepage; if corrosion appears on the malleable iron body or threads, replace the elbow rather than re-using it.

What pressure limit appears first during sustained use of this Class 150 fitting?

The Class 150 designation sets the maximum working pressure; continuous operation above that rating will stress the malleable iron before any other factor.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.