We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron 90 degree elbow with female NPT threads

Value Brand

Value Brand 90 Degree Elbow 1-1/4" FNPT Malleable Class 150 5P439

SKU CH-2YQF-16FXR

Connects two 1-1/4 inch female NPT pipes at a 90-degree angle using Class 150 malleable iron

  • 90-degree turn directs flow efficiently in tight piping layouts
  • Malleable iron construction resists cracking under mechanical stress
  • Class 150 rating suits standard-pressure water, air and gas lines
  • 1-1/4 inch FNPT threads connect directly to matching male pipe ends
  • New Zoro Select fitting arrives ready for immediate installation

90 Degree Elbow 1-1/4" FNPT

This malleable iron elbow connects two female NPT pipes at a 90 degree angle. It is rated Class 150 for standard pressure service. The fitting suits plumbing installations that require a directional change in a 1 1/4 inch line.

Threaded installation with sealant

The female NPT threads accept matching male pipe ends directly. Apply thread sealant or tape to ensure a leak free joint. Overtightening can crack the malleable iron body so tighten to a firm seat only.

Class 150 pressure rating

This elbow handles typical residential and light commercial water or air lines within its class rating. It is not suited for high pressure hydraulic systems or steam service above the class limit. Verify system pressure before installation.

Highlights

  • 90-degree turn directs flow efficiently in tight piping layouts
  • Malleable iron construction resists cracking under mechanical stress
  • Class 150 rating suits standard-pressure water, air and gas lines
  • 1-1/4 inch FNPT threads connect directly to matching male pipe ends
  • New Zoro Select fitting arrives ready for immediate installation

Specifications

BrandZoro Select

Questions about this item

How do I confirm the elbow is seated correctly after threading it onto a 1-1/4" FNPT pipe?

The joint should feel snug at 90 degrees with no visible gaps; a pressure test at the Class 150 rating will reveal any leaks.

What comes in the box and do I need separate sealant or gaskets?

The package contains the malleable iron elbow only; thread sealant or PTFE tape must be purchased separately for NPT connections.

Which version suits a standard 1-1/4" NPT plumbing run?

Choose the 1-1/4" FNPT Class 150 malleable iron elbow — it matches the 11 1/2 threads per inch NPT specification.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.