We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PVC 90-degree elbow hub fitting schedule 40

Value Brand

Value Brand 90 Deg Elbow 2 In Hub Schedule 40

SKU CH-CVHB-XXPWG

A 90-degree ABS elbow joins two 2-inch hub connections in Schedule 40 piping systems

  • 90-degree turn routes pipe around obstacles
  • Hub-to-hub solvent-weld joints create permanent leak-free seals
  • ABS material resists impact from –40 °F to 180 °F
  • Schedule 40 wall meets ASTM D3965 cell class 32222
  • New Mueller Industries fitting installs straight from the box

90-Degree Hub Elbow for ABS Systems

This schedule 40 fitting joins two 2-inch hub connections at a right angle in ABS drain waste and vent installations. It meets ASTM D3965 cell class 32222 for material quality and is rated for continuous service from -40 to 180 degrees Fahrenheit. The hub-by-hub design allows direct solvent-weld assembly without additional couplings.

Thermal and Flow Characteristics

The ABS body handles the full rated temperature span without softening or becoming brittle in normal drainage service. Smooth interior walls maintain consistent flow velocity and reduce the likelihood of debris build-up at the bend. No mechanical joints or gaskets are present, so there are no leak paths that degrade under thermal cycling.

Build Quality and Installation Notes

Steel construction provides rigidity that resists ovaling during handling and solvent welding. The schedule 40 wall thickness matches standard ABS pipe dimensions for reliable socket fit-up. Hub ends accept pipe directly, so the fitting installs with primer and cement alone, keeping the joint count low in a typical drainage layout.

Highlights

  • 90-degree turn routes pipe around obstacles
  • Hub-to-hub solvent-weld joints create permanent leak-free seals
  • ABS material resists impact from –40 °F to 180 °F
  • Schedule 40 wall meets ASTM D3965 cell class 32222
  • New Mueller Industries fitting installs straight from the box

Specifications

BrandMUELLER INDUSTRIES

Questions about this item

How do I install the 2-inch hub Schedule 40 elbow on ABS pipe, and what step is often missed?

Clean both pipe ends and the hub sockets, apply ABS cement to each surface, then push the pipe fully into both hubs and hold for the recommended set time; the step often missed is ensuring the pipe seats completely to the hub stop on both sides.

What maintenance or replacement will the ABS Schedule 40 elbow need over time?

The fitting itself requires no routine maintenance; inspect joints periodically for cracks or leaks, and replace the elbow if the ABS shows stress whitening, impact damage, or if system pressure tests reveal a joint failure.

What is the first limit reached under sustained hot-water use at the rated temperature?

The material is rated to 180 degrees F; sustained operation at or near that temperature reduces long-term pressure capacity before any other limit appears.

More in Fittings & Couplings

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.