We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized malleable iron 90 degree elbow with FNPT threads

Value Brand

Value Brand 5P801 1-1/4" FNPT Galvanized 90 Degree Elbow

SKU CH-H10S-J4N4Z

A galvanised malleable-iron 90-degree elbow with 1-1/4 in FNPT threads, rated 300 psi at 150 °F and listed to ASME B 16.3, B 16.4, ASTM A-197, ASTM A47, FM, NSF-61 and AB1953 standards

  • 90-degree turn redirects flow smoothly in tight pipe runs
  • Galvanized malleable iron body resists corrosion for long service life
  • FNPT threads seal directly to 1-1/4 inch male pipe ends
  • Class 150 rating handles 300 psi water, oil or gas at 150 °F
  • Meets ASME B16.3, B16.4, ASTM A197, A47, FM, NSF-61, AB1953 and UL standards

Galvanized 90-Degree Elbow for 1-1/4" Pipe

This galvanized malleable iron elbow changes pipe direction by 90 degrees using female NPT threads. It meets ASME B 16.3 and B 16.4 standards and carries FM, UL, NSF-61 and AB1953 listings. The Class 150 fitting is rated for 300 psi at 150 degrees Fahrenheit WOG and 150 psi saturated steam pressure. Installers needing a durable, code-compliant directional change for water, gas or steam lines will find it suitable.

Thread Compatibility and System Pressure Check

Verify that the existing piping uses 1-1/4 inch FNPT threads before ordering. Confirm the system operating pressure does not exceed the 300 psi WOG or 150 psi steam ratings. Ensure the galvanized malleable iron material is compatible with the fluid being conveyed and local code requirements. The Proposition 65 warning indicates the presence of chemicals known to cause cancer and reproductive harm.

Thermal and Pressure Performance in Service

The fitting handles saturated steam up to 150 psi and water, oil or gas up to 300 psi at 150 degrees Fahrenheit. Galvanized malleable iron construction resists corrosion under normal plumbing conditions. No moving parts or power draw are involved, so noise is limited to fluid flow through the 90-degree bend. California Proposition 65 compliance information is provided for regulatory awareness.

Highlights

  • 90-degree turn redirects flow smoothly in tight pipe runs
  • Galvanized malleable iron body resists corrosion for long service life
  • FNPT threads seal directly to 1-1/4 inch male pipe ends
  • Class 150 rating handles 300 psi water, oil or gas at 150 °F
  • Meets ASME B16.3, B16.4, ASTM A197, A47, FM, NSF-61, AB1953 and UL standards

Specifications

BrandZORO SELECT

Questions about this item

Does the Value Brand 5P801 elbow include sealant or tape, or must I buy thread sealant separately?

The fitting is supplied as a single galvanised malleable iron elbow; thread sealant or PTFE tape is not included and must be purchased separately.

Should I choose the Class 150 version or a different pressure class for a 300 psi water system?

This elbow is rated Class 150 with a maximum pressure of 300 psi at 150 °F WOG, matching the stated requirement.

What does the 300 psi @ 150 °F WOG rating mean when the elbow is installed in a hot-water line?

It indicates the fitting can safely handle 300 psi water, oil or gas pressure at temperatures up to 150 °F; saturated steam service is limited to 150 psi.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.