We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver-black galvanized 90-degree elbow fitting, 3/8 inch FNPT, malleable iron construction

Value Brand

Value Brand 5P797 3/8" FNPT Galvanized 90 Degree Elbow

SKU CH-0V03-S8QWT

A galvanized malleable-iron 90-degree elbow with 3/8-inch FNPT threads for Class 150 plumbing connections

  • Galvanized coating resists corrosion for long service life
  • 90 degree elbow redirects flow in tight spaces
  • 3/8 inch FNPT threads connect to standard pipe
  • Class 150 malleable iron handles pressure reliably
  • California Proposition 65 warning informs safe handling

Product Identity

The Value Brand 5P797 is a galvanised malleable-iron elbow with 3/8-inch female NPT threads on both ends. It suits plumbers and maintenance technicians who need a 90-degree change of direction in Class 150 water, air or gas piping systems.

Installation Notes

Thread sealant or tape must be applied to the NPT threads before tightening to prevent leaks. Over-tightening can crack the galvanised coating or strip the threads, so hand-tighten plus one to two turns with a wrench is the usual practice.

Deciding Specification

The fitting is rated Class 150 and carries a California Proposition 65 warning for chemicals known to cause cancer and reproductive harm. Buyers needing a higher pressure class or a fitting without this warning must choose a different product.

Highlights

  • Galvanized coating resists corrosion for long service life
  • 90 degree elbow redirects flow in tight spaces
  • 3/8 inch FNPT threads connect to standard pipe
  • Class 150 malleable iron handles pressure reliably
  • California Proposition 65 warning informs safe handling

Specifications

BrandZORO SELECT

Questions about this item

How do I confirm the 90 degree elbow is seated correctly after threading it onto 3/8" FNPT pipe?

The galvanised malleable iron elbow should turn smoothly until the tapered NPT threads bottom out with no visible gap between the fitting face and the pipe shoulder.

Does the package include pipe sealant or do I need to buy thread tape separately?

The box contains only the single Class 150 90 degree elbow; PTFE tape or pipe dope must be purchased separately for a leak-free joint.

When should I choose the 3/8" Class 150 version instead of a larger size?

Select this 3/8" FNPT elbow when your system uses 3/8" nominal pipe and the design pressure falls within the Class 150 rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.