We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black malleable iron tee coupling with three female threaded ends

Value Brand

Value Brand 5P483 Tee Coupling 2 Inch FNPT Malleable Iron Class 150

SKU CH-H8Y0-JKT23

A 2-inch FNPT malleable iron tee coupling rated Class 150 for 300 psi water, oil and gas service at 150 °F and 150 psi saturated steam, meeting ASTM A197, ASTM A47.

  • Rated for 300 psi water, oil and gas at 150 °F
  • 150 psi saturated steam rating for heating systems
  • Meets ASTM A-197 and ASTM A47 material standards
  • Conforms to ASME B 16.3 and B 16.14 dimensions
  • UL Listed and FM Approved for code compliance

Zoro Select 2 Inch Malleable Iron Tee

This Zoro Select tee coupling is a Class 150 malleable iron fitting with female NPT threads on all three ports. It is designed for piping systems that require a branch connection at a tee junction. The fitting meets ASTM A197, ASTM A47, ASME B16.3 and B16.14 standards and carries UL and FM approvals.

For Plumbers Needing Threaded Branch Fittings

It suits installers joining 2 inch NPT pipe runs for water, oil, gas or saturated steam service up to 300 psi WOG at 150 degrees F. It is not for systems requiring socket weld, butt weld or flanged connections, nor for pressures exceeding the Class 150 rating of 150 psi saturated steam.

Class 150 Pressure Rating at 300 PSI WOG

The decisive specification is the 300 psi WOG pressure rating at 150 degrees F, with a 150 psi saturated steam limit. This rating determines whether the fitting matches the design pressure of the intended piping system.

Highlights

  • Rated for 300 psi water, oil and gas at 150 °F
  • 150 psi saturated steam rating for heating systems
  • Meets ASTM A-197 and ASTM A47 material standards
  • Conforms to ASME B 16.3 and B 16.14 dimensions
  • UL Listed and FM Approved for code compliance

Specifications

BrandZORO SELECT

Questions about this item

How can I confirm the 2-inch FNPT tee is holding 300 psi WOG after installation?

Pressure-test the joint at up to 300 psi water-oil-gas at 150 °F and check for leaks; the Class 150 malleable-iron body meets ASTM A197 and ASME B16.3 for that rating.

What comes with the tee and what must I supply?

The box contains only the 2-inch FNPT malleable-iron tee; you must provide pipe, thread sealant or tape, and wrenches for assembly.

Which class should I choose for a 150 psi saturated-steam line?

Select the Class 150 version — it is rated for 150 psi saturated steam and 300 psi WOG at 150 °F per ASTM A197 and ASME B16.14.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.