We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron tee coupling with three 1/4 inch female NPT ports

Value Brand

Value Brand 5P476 Tee Coupling 1/4" FNPT Malleable Iron Class 150

SKU CH-XQZC-773CZ

Connects three 1/4-inch female NPT pipes using malleable iron rated for Class 150 service

  • Malleable iron construction provides Class 150 pressure rating
  • Three 1/4 inch FNPT ports enable multi-directional pipe connections
  • Value Brand 5P476 tee fitting suits standard plumbing installations
  • New condition ensures reliable performance from first use
  • Zoro Select branding identifies manufacturer quality standards

1/4" FNPT Malleable Iron Tee

This malleable iron tee fitting connects three sections of 1/4 inch FNPT piping in a T configuration. It is rated for Class 150 service and suits general plumbing installations. The ZORO SELECT component is supplied new for residential or light commercial pipework.

Threaded installation with sealant

The female NPT threads accept standard 1/4 inch male pipe ends and require thread sealant or tape for a leak-free joint. Over-tightening the malleable iron can crack the casting so hand-tight plus one to two turns is the usual practice. Misaligned pipes stress the fitting and cause leaks.

Steady pressure at Class 150 rating

Under sustained system pressure the fitting holds its rated Class 150 limit without deformation. The malleable iron body resists vibration and thermal cycling better than cast iron equivalents. It is not intended for pressures above the Class 150 designation.

Highlights

  • Malleable iron construction provides Class 150 pressure rating
  • Three 1/4 inch FNPT ports enable multi-directional pipe connections
  • Value Brand 5P476 tee fitting suits standard plumbing installations
  • New condition ensures reliable performance from first use
  • Zoro Select branding identifies manufacturer quality standards

Specifications

BrandZORO SELECT

Questions about this item

How can I verify the tee is sealed correctly after threading it onto 1/4" FNPT pipe?

Pressure-test the assembly up to the Class 150 rating and check all three 1/4" FNPT joints for leaks before putting the system into service.

What comes in the box and do I need to buy thread sealant or pipe separately?

The package contains only the malleable-iron tee; 1/4" NPT pipe lengths and thread sealant or tape must be purchased separately.

Which version of the 5P476 tee should I choose for a standard 1/4" NPT plumbing job?

The single listed model 5P476 is a 1/4" FNPT Class 150 malleable-iron tee, so it matches standard 1/4" NPT requirements directly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.