Value Brand
Value Brand 5A248 Hose Fitting 1/2 in ID 3/4-16 UNF Brass
Connects 1/2 in. hose to 3/4-16 UNF female JIC ports with reusable brass barbed fitting rated to 250 psi
- Brass construction resists corrosion with H59 alloy
- 250 psi rating handles demanding pneumatic applications
- Reusable design allows multiple installations without replacement
- Straight JIC female to hose barb male connects 1/2 in ID hose
- 55/64 in hex head enables secure wrench tightening
Brass hose fitting 3/4-16 UNF
This straight push-on hose fitting connects a 1/2 inch ID hose to a 3/4-16 UNF JIC female port. The body is machined from H59 brass with a 55/64 inch hex head for secure installation. It is rated for 250 psi working pressure and carries California Proposition 65 warnings for cancer and reproductive harm. The reusable design allows disassembly without damaging the hose or threads.
Suits single-line pneumatic connections
Builders needing a straight rigid joint between a JIC port and a push-on hose will find this part fits directly. Buyers who require an elbow, tee, or swivel configuration cannot use this straight fitting. Systems operating above 250 psi need a higher-rated component not offered here. The brass construction is not intended for highly corrosive fluids or potable water lines.
250 psi working pressure defines the limit
The 250 psi rating is the single specification that determines whether this fitting matches the system pressure. Exceeding this value risks leakage or burst failure at the barb or thread seal. No other dimension or material property overrides this pressure ceiling for safe operation. Verify the circuit maximum pressure before selecting this part.
Highlights
- Brass construction resists corrosion with H59 alloy
- 250 psi rating handles demanding pneumatic applications
- Reusable design allows multiple installations without replacement
- Straight JIC female to hose barb male connects 1/2 in ID hose
- 55/64 in hex head enables secure wrench tightening
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
What does the 250 psi rating mean when the fitting is installed on a hose?
The fitting is rated for a maximum working pressure of 250 psi when properly assembled to a compatible 1/2 inch ID hose.
How does the 3/4-16 UNF thread interface limit what it can connect to?
The 3/4-16 UNF JIC female thread only mates with a matching JIC male fitting of the same thread size and pitch.
What hose size and tool clearance does the 1/2 inch barb and 55/64 inch hex require?
It fits 1/2 inch ID push-on hose and needs a 55/64 inch wrench or socket to tighten the hex head.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
