We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanised carbon steel pipe nipple with male threads both ends

Value Brand

Value Brand 568-480GR 2" MNPT x 4 ft TBE Carbon Steel Pipe Nipple Sch 40

SKU CH-CR2V-QGDVZ

Galvanized carbon steel pipe nipple with 2" MNPT threads, 4 ft length and Schedule 40 wall

  • Schedule 40 wall thickness for standard pressure ratings
  • 4 ft overall pipe length suits typical plumbing runs
  • Galvanized carbon steel construction resists corrosion
  • 2 inch MNPT threads connect to compatible fittings
  • TBE ends ready for threading or welding

2-inch MNPT carbon-steel nipple

The Value Brand 568-480GR is a 4 ft threaded-both-ends pipe nipple built from galvanized carbon steel. It is intended for plumbers and maintenance crews who need a straight Schedule 40 connector with male NPT threads on each end.

Schedule 40 upgrade path

This nipple replaces lighter-wall or uncoated pipe sections where higher pressure ratings and corrosion resistance are required. The jump is worth it when the system demands the wall thickness and galvanised finish that Schedule 40 provides for water, air or oil lines.

4 ft length headroom

The four-foot span comfortably bridges standard fitting centres in commercial and industrial plumbing runs. It runs out when the installation calls for a shorter close nipple, a longer custom length or a different thread type such as BSPT or flanged ends.

Highlights

  • Schedule 40 wall thickness for standard pressure ratings
  • 4 ft overall pipe length suits typical plumbing runs
  • Galvanized carbon steel construction resists corrosion
  • 2 inch MNPT threads connect to compatible fittings
  • TBE ends ready for threading or welding

Specifications

BrandZORO SELECT

Questions about this item

What thread size and length does the 2" MNPT nipple need for a secure fit?

The nipple has 2" male NPT threads on both ends and an overall length of 4 ft, so the mating fittings must accept 2" NPT and allow for the full 4 ft span.

How do I install the TBE carbon steel nipple without damaging the galvanized coating?

Apply thread sealant only to the male threads, tighten with a pipe wrench on the unthreaded barrel section, and avoid over-torquing which can strip the zinc layer.

When should I plan to replace the Sch 40 galvanized nipple in a water system?

Inspect annually for white rust or pitting; replace if the galvanized layer is breached or if leaks appear at the 2" NPT joints after 480 hours of pressure testing.

More in Hoses, Pipes & Tubing

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.