We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized steel pipe nipple, 2 inch MNPT threaded both ends, 3 foot length, Schedule 40

Value Brand

Value Brand 568-360GR 2" MNPT x 3 ft TBE Galvanized Steel Pipe Nipple Sch 40

SKU CH-GYY6-662QR

Threaded both ends, 3 ft Schedule 40 galvanized steel nipple rated 940 psi at 650 °F

  • Schedule 40 wall rated for 940 psi at 650 °F
  • Galvanized steel resists corrosion in water lines
  • 2" MNPT threads on both ends for direct fit
  • Electric-resistance welded seam meets ANSI B1.20.1
  • 3 ft overall length with 2.067 in inside diameter

2-Inch Schedule 40 Galvanized Nipple

This 2-inch nominal pipe nipple is built for threaded plumbing assemblies that require a 3-foot overall length. The galvanized steel construction suits water, air and oil lines in commercial and industrial piping systems. Both ends carry male NPT threads to ANSI B1.20.1 Class 150 for direct engagement with standard fittings.

Electric-Resistance Weld With 940 PSI Rating

The pipe wall measures 0.154 inch thick, yielding a 2.067-inch inside diameter and 2.875-inch outside diameter. Electric-resistance welding provides a continuous seam rated for 940 psi at 650 degrees Fahrenheit. The galvanized coating resists corrosion in exposed runs, while the threaded ends allow disassembly without cutting.

Ready for Immediate Threaded Installation

No additional couplings or adapters are needed because both ends are pre-threaded MNPT. The nipple arrives clean and metal-detectable for safety compliance in regulated environments. Installers can tighten directly into Class 150 fittings, reducing labour time on new runs or repair work.

Highlights

  • Schedule 40 wall rated for 940 psi at 650 °F
  • Galvanized steel resists corrosion in water lines
  • 2" MNPT threads on both ends for direct fit
  • Electric-resistance welded seam meets ANSI B1.20.1
  • 3 ft overall length with 2.067 in inside diameter

Specifications

BrandZORO SELECT

Questions about this item

What pressure does the Schedule 40 galvanized pipe handle at 650 °F?

The nipple is rated for 940 psi at 650 °F under the ANSI B1.20.1 Class 150 standard.

What wall thickness and outside diameter must a 2-inch fitting match?

The pipe has a 0.154-inch wall and a 2.875-inch outside diameter.

How do you seal the MNPT threads without cracking the galvanized coating?

Apply PTFE tape or pipe dope only to the male threads, tighten by hand plus one to two turns with a wrench, and avoid over-torquing which can split the zinc layer.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.