We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanised carbon steel pipe nipple, threaded both ends, 5 ft length

Value Brand

Value Brand 567-600GR 1-1/2" MNPT x 5 ft TBE Carbon Steel Pipe Nipple Sch 40

SKU CH-GPGY-KP790

Threaded carbon steel pipe nipple, Schedule 40, rated 1064 psi at 650 °F

  • Schedule 40 wall rated for 1064 psi at 650 °F
  • Galvanized carbon steel resists corrosion in water lines
  • Electric-resistance weld gives consistent joint strength
  • 61 in bore keeps flow area predictable
  • ANSI B1.20.1 Class 150 threads ensure reliable seal

1-1/2" Schedule 40 Carbon Steel Pipe Nipple

This 5 ft nipple provides a threaded connection for plumbing systems requiring galvanized carbon steel. The Schedule 40 wall thickness supports a maximum pressure of 1064 psi at 650 Degrees F. Both ends feature male NPT threads sized for 1-1/2 inch nominal pipe.

Welded construction frees up assembly time

Electric resistance welding creates a continuous seam that eliminates the need for field welding on straight runs. The galvanized coating protects the steel during storage and installation. Metal detectable material allows location with standard equipment after burial or concealment.

Replaces field-cut and threaded pipe

Builders who previously cut and threaded raw pipe on site gain consistent wall thickness of .145 in and verified ANSI B 1.20.1 Class 150 compliance. The jump is worth it when project specs demand documented pressure ratings and uniform inside diameter of 1.61 in. Not for systems requiring flanged connections or smaller nominal sizes.

Highlights

  • Schedule 40 wall rated for 1064 psi at 650 °F
  • Galvanized carbon steel resists corrosion in water lines
  • Electric-resistance weld gives consistent joint strength
  • 61 in bore keeps flow area predictable
  • ANSI B1.20.1 Class 150 threads ensure reliable seal

Specifications

BrandZORO SELECT

Questions about this item

What is the maximum pressure this Schedule 40 nipple can handle at high temperature?

The nipple is rated for a maximum pressure of 1064 psi at 650 degrees Fahrenheit, meeting ANSI B 1.20.1 Class 150 standards for threaded connections.

Will the galvanized carbon steel pipe become too hot to touch during continuous hot water circulation?

At the rated 650 degrees Fahrenheit operating temperature, the 1.9 inch outside diameter carbon steel surface will be extremely hot and requires proper insulation for safety.

What thread standard must my existing fittings match to connect to this nipple?

Both ends feature 1-1/2 inch MNPT threads conforming to ANSI B 1.20.1, so mating fittings must use the same National Pipe Taper standard for a proper seal.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.