We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White ABS 45-degree elbow hub fitting 1-1/2 inch schedule 40

Value Brand

Value Brand 45 Degree Elbow Hub x Hub 1-1/2 Inch Schedule 40 ABS

SKU CH-VD6N-MEKEC

ABS 45-degree hub-to-hub elbow for 1-1/2 inch Schedule 40 pipe meets ASTM D3965 cell class 32222 and handles -40 to 180 degrees F

  • 45-degree turn redirects flow smoothly in tight spaces
  • Hub-to-hub solvent-weld joints create leak-resistant connections
  • ABS construction handles -40 °F to 180 °F service temperatures
  • Schedule 40 wall meets ASTM D3965 cell class 32222
  • 1-1/2 inch size fits standard residential drain lines

45 Degree Elbow Hub x Hub

This Value Brand ABS fitting connects two 1-1/2 inch hub connections at a 45 degree angle. It meets Schedule 40 dimensions and conforms to ASTM D3965 cell class 32222 for material quality.

Suits DWV and low-pressure systems

Plumbers running drain, waste or vent lines in residential or light commercial buildings will find this elbow matches standard hub dimensions. Installers needing solvent-weld sockets, threaded ends or a different pipe diameter should select another fitting.

Schedule 40 ABS construction

The fitting is rated for continuous service from -40 to 180 degrees Fahrenheit. This temperature range determines whether the material will withstand the intended application environment.

Highlights

  • 45-degree turn redirects flow smoothly in tight spaces
  • Hub-to-hub solvent-weld joints create leak-resistant connections
  • ABS construction handles -40 °F to 180 °F service temperatures
  • Schedule 40 wall meets ASTM D3965 cell class 32222
  • 1-1/2 inch size fits standard residential drain lines

Specifications

BrandZORO SELECT

Questions about this item

What pipe size does the 1-1/2 inch hub connection fit?

The hub connections are sized for 1-1/2 inch ABS pipe with a Schedule 40 wall thickness.

How do you join the hub ends to the pipe, and what step is often missed?

Apply ABS solvent cement to both the pipe end and the hub socket, then push fully home with a quarter turn; the step often missed is holding the joint for several seconds to prevent push-out.

When should the fitting be inspected or replaced after installation?

Inspect if the system operates near the 180 degrees F upper limit or after impact; replace if cracking, deformation or joint leakage appears.

More in Fittings & Couplings

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.