We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron 45 degree elbow, 1/2 inch FNPT, class 150, dark finish

Value Brand

Value Brand 45 Degree Elbow 1/2" FNPT Malleable 150 Class 469

SKU CH-GAN7-XAANZ

A 45-degree malleable iron elbow with 1/2-inch FNPT threads rated for Class 150 service

  • 45-degree turn routes pipe around obstacles
  • 1/2-inch FNPT threads connect without welding
  • Class 150 rating handles standard-pressure systems
  • Malleable iron body resists cracking under stress
  • Zoro Select brand ensures consistent manufacturing quality

45 Degree Elbow 1/2" FNPT

This malleable iron elbow provides a 45 degree change of direction in piping systems. It features female NPT threads on both ends for connecting 1/2 inch pipe. The fitting is rated Class 150 for standard pressure service.

Suited for threaded pipe installations

Installers joining two sections of 1/2 inch male threaded pipe at a 45 degree angle will find this fitting matches the requirement. It is not intended for systems using a different thread standard, a larger or smaller pipe size, or a higher pressure class than Class 150.

Class 150 pressure rating

The single specification that determines suitability is the Class 150 rating, which defines the maximum allowable pressure for the fitting at a given temperature. Verify that the system design pressure falls within this class before installation.

Highlights

  • 45-degree turn routes pipe around obstacles
  • 1/2-inch FNPT threads connect without welding
  • Class 150 rating handles standard-pressure systems
  • Malleable iron body resists cracking under stress
  • Zoro Select brand ensures consistent manufacturing quality

Specifications

BrandZORO SELECT

Questions about this item

What comes with the Value Brand 45 Degree Elbow 1/2" FNPT Malleable 150 Class 469 and do I need to buy anything else?

The fitting itself is supplied ready to install; pipe-thread sealant or tape for the 1/2" FNPT threads must be purchased separately.

Which version of the Value Brand 45 Degree Elbow 1/2" FNPT Malleable 150 Class 469 should I choose?

This model is a single 45-degree malleable iron elbow rated Class 150 with 1/2" female NPT threads on both ends; no alternative capacities or configurations are offered.

What does the Class 150 rating mean when the elbow is installed in a piping system?

Class 150 indicates the fitting is designed for a maximum working pressure of 150 psi at ambient temperature in standard water, oil or gas service.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.