Value Brand
Value Brand 41R224 14" Stick Electrode 3/32" AWS Wearcote 5 lb
A 14 inch stick electrode for general purpose hardfacing with AWS Wearcote classification
- TypeWelding Supplies
- Hardfacing electrode extends part life in abrasive environments
- 14 inch length suits standard stick welding holders
- 3/32 inch diameter works with common amperage ranges
- AWS Wearcote classification confirms hardfacing alloy composition
- 5 lb tube provides enough rods for multiple repair jobs
Hardfacing Electrode for Wear Repair
Value Brand 41R224 is a 14 inch stick electrode built for hardfacing applications. The 3/32 inch diameter suits general purpose wear repair on metal surfaces. Each tube holds five pounds of AWS Wearcote classified rods. The product is new and intended for welding supply use.
Suited for Maintenance and Fabrication Shops
Welders who need to rebuild worn parts or add abrasion resistant surfaces will find this electrode matches the task. The AWS Wearcote classification indicates a hardfacing alloy designed for impact and abrasion resistance. Buyers who require a specific tensile strength rating for structural code work should look at alternatives with documented mechanical properties. The electrode is restricted from sale in California due to Proposition 65 chemical warnings.
3/32 Inch Diameter Determines Fit
The 3/32 inch rod diameter decides whether this electrode fits the job and the holder. It matches common light to medium hardfacing passes on carbon and low alloy steels. A different diameter would change amperage range and deposition rate. The 14 inch length and five pound tube quantity support extended use without frequent changeover.
Highlights
- Hardfacing electrode extends part life in abrasive environments
- 14 inch length suits standard stick welding holders
- 3/32 inch diameter works with common amperage ranges
- AWS Wearcote classification confirms hardfacing alloy composition
- 5 lb tube provides enough rods for multiple repair jobs
Specifications
| Brand | WESTWARD |
|---|---|
| Type | Welding Supplies |
Questions about this item
How do I load the 14 inch rods from the 5 lb tube into my holder without dropping them?
Open the tube, slide out one 14 inch rod, and clamp it firmly in the electrode holder so the 3/32 inch core is centred in the jaws.
What wear indicates the Wearcote hardfacing electrode needs replacing?
Replace the rod when the 3/32 inch diameter core has melted back to the holder or the hardfacing deposit no longer builds the surface you are repairing.
At what point does the 14 inch length limit continuous welding time?
Each 14 inch rod gives one pass; when the stub reaches the holder you must stop and load a fresh rod from the 5 lb tube.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
